The energy content of steam at a given pressure, such as 150 psi, depends on the specific volume and temperature of the steam. To determine the number of joules, you would need more specific information about the steam properties.
The specific volume of one pound of steam at 150 psi pressure depends on the temperature and specific enthalpy of the steam. Without this information, it is not possible to determine the specific volume accurately.
The temperature of 70 psi steam is approximately 318°F.
The temperature of 110 psi steam is approximately 338 degrees Fahrenheit.
The steam temperature at 10 PSI is approximately 239 degrees Fahrenheit.
The temperature of 50 psi steam is approximately 298°F (148°C).
The specific volume of one pound of steam at 150 psi pressure depends on the temperature and specific enthalpy of the steam. Without this information, it is not possible to determine the specific volume accurately.
You can't compare or convert that. psi is a unit of pressure; joule is a unit of energy.
Type your answer here... 150 wsp means 150 pounds working steam pressure, and 500 wog means water oil gas, there is a temperature limit on the valve, typically 200degrees Fahrenheit. The steam maximum for the valve with the 150 wsp is 150 pounds per square inch. When you ask if the valve is good for 260 psi, you need to ask if it is water, oil or gas, BUT not steam. 150 wsp is maximum 150 pounds of steam pressure.
The temperature of 70 psi steam is approximately 318°F.
Automatics can function in the 50 -150 psi range.Automatics can function in the 50 -150 psi range.
The temperature of 110 psi steam is approximately 338 degrees Fahrenheit.
The steam temperature at 10 PSI is approximately 239 degrees Fahrenheit.
The temperature of 50 psi steam is approximately 298°F (148°C).
1 litre diesel in joules
Should be around 150 psi.
150 MPa yield is equivalent to approximately 21,755 PSI. This means that a material with a yield strength of 150 MPa can withstand the same amount of stress as a material with a yield strength of 21,755 PSI before plastic deformation.
At 20 PSI (pounds per square inch), the temperature of steam is typically around 250°F (121°C).