25 litres of water weighs 25 kg. Easy huh?
If you convert 25 milliliters into the measurement of liters you have 0.025 liters. One liter is equal to 0.001 liters.
25 quarters weigh approximately 5.81 ounces.
2000 quarters weigh approximately 25 pounds. Each quarter weighs about 5.67 grams, so 2000 quarters would weigh roughly 11.34 kilograms or 25 pounds.
This makes no sense man! ounce is weight and liters are volume. it depends wat you liquid you got in. so say you got your 2.5 liters of PCP in there, that mite weigh more than 2.5 liters of LCD cause certain liquids are more dense than others, dats why oil floats on water. you get me?
400 ounces = 25 pounds (400/16=25)
That weighs 25 kg.
roughly 21.9 kg
25 Liters
25 liters equates to about 52.8 pints.
Only if you have pure water in mind: 25 milliliters of pure water weigh 25 grams.
The conversion between liters and kilograms depends on the density of the substance. For water, which has a density of 1 kg/L, 25 liters would weigh 25 kilograms. For other substances, you would need to know their density to convert from liters to kilograms.
25 pounds
depends on the density of the liquid in question. 25 liters of water will be heavier than 25 liters of gasoline.
A small milk carton typically contains 250 ml of milk, not 25 liters. The volume of 250 ml is equivalent to 0.25 liters, which is a common size for single-serving cartons. In contrast, 25 liters is a much larger volume, not typically found in consumer milk packaging.
If you convert 25 milliliters into the measurement of liters you have 0.025 liters. One liter is equal to 0.001 liters.
The weight of 25 liters of sand depends on its density, which typically ranges from 1,400 to 1,600 kg/m³. Since 1 liter is equivalent to 0.001 cubic meters, 25 liters is 0.025 cubic meters. Therefore, 25 liters of sand would weigh approximately between 35 kg (for lower density) and 40 kg (for higher density).
To reduce a 25% acid solution to 10%, the water needed can be calculated using the formula: (10 x (25-10))/(10) = 1.5 liters. So, 1.5 liters of pure water must be mixed with the 10 liters of 25% acid solution to reduce it to 10%.