I looked at some sites* online and found a full drum of crushed fluorescent bulbs can weigh over 500 pounds. I talked to someone who deals with these drums in great quantity and he said each drum filled with crushed fluorescent glass was 450 pounds. So I will tell you, it's safe to say one full drum could way above 450 pounds so be prepared if you need to move one of these things around.
490 lb/ft^3
It varies depending on the glass, but about 2.6 grams.
It depends on what glass is used to make the insulated window. Most often 1/16ths" to 1/4" glass is used, sometimes asymmetrically. The spacer and air space weight is negligible. The difference between tempered, colored, low e and clear glass is also negligible. If 1/16" glass (called single strength - 1/8th inch is double strength) is used then the window will weigh .85375 per square foot (height times width) times two (each side). Or to make it easier just use the total size together, i.e., 1/16th glass plus 1/16th glass on each side is 1/8" thick overall or 1/4" plus 1/4" is 1/2" overall. Glass weights: 1" = 13.5 lb/sq', 1/2" = 6.75 lb/sq', 3/8" = 5.063 lb/sq', 1/4" = 3.375 lb/sq', 1/8" = 1.6875 lb/sq', 1/16" = .85375 lb/sq'. A one foot square insulated window made with 1/4" glass each side will weigh about 6.75pounds.
There are many instruments used. And it all comes down to what you want the water for. For a general estimate, a beaker can be used for larger quantities of water, but the measurements can be off. A graduated cylinder is great for measuring accurately, but generally doesn't hold as much water. Extremely accurate devices include a pipet (like a big eyedropper) or a buret. But these generally hold very very small amounts of water. If you don't know what these devices look like, you can simply Google them.
An apple would weigh about 150,000 milligrams.
A hole.
It depends on how big the originial un-crushed rock was. If you specify a weight for the original rock then maybe a formula can be devised for this question. However, anything that is solid and then broken into smaller particles will weigh less because some of the particles disappear from the area where you crushed the original form (they may become too small to measure so the weight decreases cosiderably and is more spread out ).
A cubic yard of finely crushed asphalt will weigh about 2,600 pounds
Hmmmm, How big of a bag? How big are the cans? How many cans in it? What are the cans made out of? Are they aluminum? Are they steel? Hmmmmm.
Depends on the material of that fiber glass weigh.
1 yard of 1" crushed stone
No, a crushed can does not weigh less than an uncrushed can – the weight of the aluminum remains the same regardless of its shape. The can may appear smaller due to being crushed, but the weight remains constant.
The weight of crushed tomatoes can vary slightly, but one can estimate that 796 ml would weigh approximately 796 grams.
its glass. are you stupid?
.... in theory the same as not folded steel.
The crushed can will have a density that is quite a bit higher than the density of the can before it was crushed. Imagine a box of empty aluminum beverage cans. It won't weigh much. If those same cans are crushed, they will weigh the same, but take up a lot less space. The density of the cans can be increased by crushing them. The cans might be said to have a low bulk density before being crushed.
On average, a 55 gallon drum filled with crushed aluminum cans can weigh around 300-400 pounds. The weight can vary depending on factors such as the density of the crushed cans and the specific type of aluminum being recycled.