0
In 1927, the Department of Commerce standardized the height and weight of mike bottles. The standardized weight of a quart sized milk bottle was 25.5 ounces. Different sized bottles, in different countries, and perhaps made of different materials would likely vary greatly in weight.
What else can I help you with?
How much does a 1 gallon HDPE milk jug weigh?
A 1-gallon HDPE milk jug typically weighs around 68-90 grams.
How much does a standard plastic 1 gallon milk jug weigh empty?
Nonfat milk is very close in density to water which weighs 8 pounds per gallon.
How much does a 1 gallon water jug filled with pennies weigh?
Pennies weigh about 2.5 grams each. There are roughly 181 pennies in a pound and 2,381 pennies in a gallon. So, a 1 gallon water jug filled with pennies would weigh approximately 9.5 pounds.
How much does a jug water weigh?
It varies from jug to jug but if you want to find out the capacity of your jug fill it up with water and then pour it into a measuring device.
If you have an 8 liter jug and a three liter jug bothe are unmarked You need exactly 4 liters of water How can you get it if a water faucet is handy?
Fill small 3 liter jug with water. Pour into large 8 liter jug. Repeat. Now 6 liters of water in large jug. Repeat again but stop when large jug full. Leaves 1 liter in small jug. Empty large jug. Pour water from small jug into large jug. Refill small jug and pour into large jug. There are now 4 liters of water in large jug.
How does the milk bottle work?
There are several ways you could determine the capacity of a milk jug: 1: Fill the milk jug with water and then transfer the water to a graduated measuring jug 2: take a bottle of known volume such as a soda bottle. Fill the soda bottle and transfer its contents to the milk jug to get its approximate capacity 3: weigh the empty milk jug and make a note of the weight. Then, fill the milk jug with water. 1 cubic cm of water weighs 1 gram. Deduct the weight of the empty jug from the weight of the full jug to give the weight of the water inside. If, for example, the water weighs approximately 1000 grams then you have a 1 litre milk jug
How much does a 1 gallon HDPE milk jug weigh?
A 1-gallon HDPE milk jug typically weighs around 68-90 grams.
What is the mass of a milk jug?
The mass of a standard empty milk jug typically ranges from about 100 to 200 grams, depending on its size and material. A full gallon of milk weighs approximately 3.8 kilograms (or about 8.6 pounds), which includes the mass of the jug itself. Therefore, the total mass of a full milk jug would be the combined weight of the milk and the jug.
How much motor oil does a 1976 Honda cb 360 take?
probably about 2-3 quarts, what i do is drain oil into a pan then keep an empty milk jug around , dump oil into milk jug then you know how much came out. that's how much to put in then check level with dipstick or sightglass whichever you have, then add accordingly
How many liters does a milk jug hold?
You can get a 1 quart jug of milk or a 2 quart jug of milk
How can you measure out exactly 3 liters of water with only a 9 liter and 7 liter jug?
Fill the seven litre jug. Empty into 9l jug. Refill 7 litre jug and empty into 9l jug. 7l jug now contains 5l, whilst 9l jug is full. Empty 9l jug. Pour contents of 7l jug into 9l jug. Refill 7l jug and empty into 9l jug. The remainder in the 7l jug will be 3 litres
How many gallons are in milk jug?
There is 1 gallon of milk in the typical milk jug.
What do you do when your at 24 carrot island after you have the empty bowl?
well, you go to some supermarket and ask the woman to give some milk from the jug.
How much money in pennies will a half gallon milk jug hold?
A half gallon jug can hold about $25.00 in pennies. (:
How can you measure out half a pint using a 1.75 pint jug and a pint jug?
If A = 1.75 pint jug, and B = 1 pint jug 1) Fill 1.75 pint jug [then afterwards A = 1.75 B = 0] 2) From it pour 1 pint into the other jug [A = 0.75 B = 1.00] 3) Empty 1 pint jug, and into it pour the 0.75 pints [A = 0 B = 0.75] 4) Fill 1.75 pint jug again [A = 1.75 B = 0.75] 5) Pour enough (0.25 pint) from it to fill the 1 pint jug [A = 1.50 B = 1.00] 6) Finally, empty the 1 pint jug, and from the remaining 1.5 pints in the 1.75 pint jug, pour 1 pint of it into the 1 pint jug [A = 0.5 B = 1.00] So in six stages there will be half a pint in the 1.75 pint jug!
How much does a 5-gallon water jug filled with pennies weigh?
176 pounds
How much does a 2 gallon water jug weigh without water?
0.5 pounds
