0
What else can I help you with?
How much does a halo spartan weigh?
On average, Spartan-II's weigh about 1000 lbs in their armor.
How much do atomic bombs weigh?
The weight of an atomic bomb can vary depending on its design and yield. However, typical weights for atomic bombs used during World War II range from around 4,000 to 10,000 pounds.
How much does a 1943 penny weigh?
An unworn 1943 zinc-coated steel cent weighs 2.7 gm. That compares with a standard weight of 3.11 gm for normal bronze Lincoln cents (pre-1982), and 2.5 gm for current copper-plated zinc cents.
Which is a produced using the energy from photons hitting photosystem ii?
ATP is produced using the energy from photons hitting photosystem II through the process of photosynthesis.
How much did the bouncing bomb cost?
During World War II, each bouncing bomb used by the Royal Air Force (RAF) cost around £1,844 to produce. These bombs were primarily used during the famous Dambusters raid in 1943.
What are the steps in changing the cartridge on an IBM selectric II?
The Selectric II is a typewriter. Ribbon is called a cassette, not cartridge. As I recall to replace ribbon there is a lever on right of it that is pulled forward to release used ribbon. Correctable model also uses a correction tape.
Can the Selectric III use the same letter ball as the Selectric II?
Yes, the Selectric III can use the same letter ball as the Selectric II. Both typewriters are compatible with the same interchangeable typing elements, allowing you to use the same letter ball on either machine.
How much does a Ford Mustang cobra ii weigh?
3400
How much does Elizabeth II weigh?
the queen weighs 134 kilograms.
How much does a Chevy II weight?
A stripped down 62-65 Chevy II will weigh about 2900 Lbs.
How much does Itachi weigh?
Part I: 57.1 kgPart II: 58 kg
How much does Queen Elizabeth II Bridge weigh?
the queen Elizabeth's bridge weighs 2,0000 kg
Why did IBM beat Remington Band in the computer business?
IBM and Remington Rand electric typewriters were the leading models until IBM introduced the IBM Selectric typewriter in 1961, which replaced the typebars with a spherical element (or typeball) slightly larger than a golf ball, with reverse-image letters molded into its surface. The Selectric used a system of latches, metal tapes, and pulleys driven by an electric motor to rotate the ball into the correct position and then strike it against the ribbon and platen. The typeball moved laterally in front of the paper instead of the former platen-carrying carriage moving the paper across a stationary print position. IBM Selectric II (dual Latin/Hebrew typeball and keyboard)Selectric II dual Latin/Hebrew Hadar typeballReplaceable IBM typeballs with clip, 2 Euro coin for scaleThe typeball design had many advantages, especially the elimination of "jams" (when more than one key was struck at once and the typebars became entangled) and in the ability to change the typeball, allowing multiple fonts to be used in a single document. Selectric mechanisms were widely incorporated into computer terminals in the 1960s, as they possessed obvious advantages:The mechanism was reasonably fast and jam-freeIt could produce high quality output compared to competitors such as Teletype machinesIt could be initiated by a short, low-force mechanical actionIt did not require the movement of a heavy "type basket" to shift between lower- and upper-caseIt did not require the platen roller assembly to move from side to side (a problem with continuous-feed paper)The IBM 2741 terminal was a popular example of a Selectric-based computer terminal, and similar mechanisms were employed as the console devices for many IBM System/360 computers. These mechanisms used "ruggedized" designs compared to those in standard commercial typewriters.IBM also gained an advantage by marketing more heavily to schools than did Remington, with the idea that students who learned to type on an IBM Electric would later choose IBM typewriters over the competition in the workplace as businesses replaced their old manual models.[citation needed]Later models of IBM Executives and Selectrics replaced inked fabric ribbons with "carbon film" ribbons that had a dry black or colored powder on a clear plastic tape. These could be used only once, but later models used a cartridge that was simple to replace. A side effect of this technology was that the text typed on the machine could be easily read from the used ribbon, raising issues where the machines were used for preparing classified documents (ribbons had to be accounted for to ensure that typists didn't carry them from the facility).[8] Composer output showing Roman, Bold and Italic fonts available by changing the type ballA variation known as "Correcting Selectrics" introduced a correction feature, where a sticky tape in front of the carbon film ribbon could remove the black-powdered image of a typed character, eliminating the need for little bottles of white dab-on correction fluid and for hard erasers that could tear the paper. These machines also introduced selectable "pitch" so that the typewriter could be switched between pica type(10 characters per inch) and elite type (12 per inch), even within one document. Even so, all Selectrics were monospaced-each character and letterspace was allotted the same width on the page, from a capital "W" to a period. Although IBM had produced a successful typebar-based machine with three levels of proportional spacing, called the IBM Executive, no proportionally spaced Selectric office typewriter was ever introduced. There were, however, two other machines with fully proportional spacing: the expensive Selectric Composer, which was capable of right-margin justification and was considered a typesetting machine rather than a typewriter, and the more reasonably-priced IBM Electronic Typewriter 50, which was capable of proportional spacing but not right-justifying. By 1970, as offset printing began to replace letterpress printing, the Composer would be adapted as the output unit for a typesetting system. The system included a computer-driven input station to capture the key strokes on magnetic tape and insert the operator's format commands, and a Composer unit to read the tape and produce the formatted text for photo reproduction.
How much does the microwave over weigh?
The KitchenAid Architect II KBMS1454SSS 1.4 CuFt Built-In Microwave Oven weighs 86 pounds.
What has the author Jerald Brown written?
Jerald Brown has written: 'IBM PC' -- subject(s): File organization (Computer science), IBM Personal Computer, Programming 'PCJR Data File Programming' 'BASIC for the APPLE II' -- subject(s): Apple II (Computer), BASIC (Computer program language), Programming
How much does a halo spartan weigh?
On average, Spartan-II's weigh about 1000 lbs in their armor.
How much does a breitling WATCH weigh?
There are many models of watches from Breitling. The Avenger II watch produced by Breitling weighs 117.05 grams without the strap.
