6J
The current through the battery is the flow of electric charge, measured in amperes (A), that is being supplied by the battery at a given moment.
The amount of charge that flowed through the switch when it was closed depends on the current passing through it and the time it was closed for.
<p><p> Voltage = 6 V Charge = 1 C Current * Time = Charge V * t = Q Energy = Current * Voltage * Time E = VIt E = Q * V E = 1 C * 6 V E = 6 Joules Therefore energy given to each coulomb of chare passing through 6 V battery is 6 Joules . Cheers !
Farad = Coloumb / Volt; solving for Coloumb, you get Coloumb = Farad x Volt. Just plug in the numbers - 1 microfarad is a millionth farad; 0.001 microfarad - if that is what you mean - is 0.000000001 Farad; wherease 1 KV = 1000 Volts.
If the surface does not enclose any charge, the electric flux through the surface will be zero. This is because electric flux is a measure of the total electric field passing through a surface, and if there are no charges within the surface, there will be no electric field passing through it.
1.5 volts means 1.5 joules/coloumb.
6.24151 × 1018 electrons have a charge of minus one coloumb (the coloumb is defined in terms of positive charge). I don't know what you mean by "delocalized", but normally all electrons have the same charge.
You can not charge a battery in the microwave.
property of a conductor that opposes the flow of charge passing through it
Perhaps you are thinking about electricity. There is a quantity called "current" that indicates how much charge passes a certain point every second. The unit is the ampere, and it is equal to 1 Coloumb/second. Coloumb is the unit of electric charge. The ampere is not defined that way, but this is easier to understand than the official explanation.Perhaps you are thinking about electricity. There is a quantity called "current" that indicates how much charge passes a certain point every second. The unit is the ampere, and it is equal to 1 Coloumb/second. Coloumb is the unit of electric charge. The ampere is not defined that way, but this is easier to understand than the official explanation.Perhaps you are thinking about electricity. There is a quantity called "current" that indicates how much charge passes a certain point every second. The unit is the ampere, and it is equal to 1 Coloumb/second. Coloumb is the unit of electric charge. The ampere is not defined that way, but this is easier to understand than the official explanation.Perhaps you are thinking about electricity. There is a quantity called "current" that indicates how much charge passes a certain point every second. The unit is the ampere, and it is equal to 1 Coloumb/second. Coloumb is the unit of electric charge. The ampere is not defined that way, but this is easier to understand than the official explanation.
Zero or more. Zero if there is no current.The amount of electrons is related to the electric charge, not to the voltage. Electric charge is measured in Coloumb. Current is measured in Ampère, which is Coloumb per second.
No, Coloumb is the unit of charge. The SI unit of energy is Joule.
The potential difference ('voltage') is equal to the work done per unit charge, i.e. the energy given to each Coulomb of charge. So, a six Volt battery provides six Joules of energy to each Coulomb of charge.
A battery jump starter works by taking the charge from another battery, such as in another car, and passing it to the dead battery. When the charge is sufficient in starting the dead battery, it should then start charging itself as the engine runs.
1 Coloumb is the charge of about −6.24151 × 1018 electrons. Divide that by 109 - and note that a coloumb is defined as a positive charge, while an electron has a negative charge.
The current through the battery is the flow of electric charge, measured in amperes (A), that is being supplied by the battery at a given moment.
You can use a universal charger. Usually they should charge any battery under 4.8v.