That depends on the fuel you use. One kilogram of hydrogen will result in the release of 286 megajoules when wholly combusted with oxygen; one kilogram of ethanol will release 30 megajoules. Comparatively, one kilogram of nuclear fuel consisting of pure uranium-235 (the radioactive part of enriched uranium, normally present at about 5% in nuclear reactors) will produce around 83 terajoules - approximately 2.5 million times that of ethanol.
The energy produced by converting 10 kg of mass into energy is calculated using Einstein's famous equation E=mc^2. For 10 kg of mass, the energy produced would be approximately 9 x 10^17 joules.
The amount of thermal energy produced depends on the source of heat, the duration of heating, and the specific conditions of the system. To calculate the thermal energy produced, you would need to know the specific heat capacity of the material being heated, the mass of the material, and the temperature change that occurred. You can use the formula Q = mcΔT, where Q is the thermal energy produced, m is the mass of the material, c is the specific heat capacity, and ΔT is the temperature change.
Kinetic energy is a type of energy associated with the motion of an object. It is calculated using the formula: KE = 1/2 * mass * velocity^2. The amount of kinetic energy produced depends on the mass and velocity of the object in motion.
The rate at which an electrical device converts energy from one form to another is known as its power consumption. This is typically measured in watts and indicates how much energy the device is using per unit of time.
Not much is known yet about the Higgs Boson. The recently announced particle, which might be the Higgs boson, has a mass of about 125 GeV/c2; if you like, you can convert that to joules, to get the total energy. I assume that when such a particle decays, much of its mass will be converted to energy.
The energy produced by converting 10 kg of mass into energy is calculated using Einstein's famous equation E=mc^2. For 10 kg of mass, the energy produced would be approximately 9 x 10^17 joules.
The energy produced by the fuel can be calculated using the energy equivalence of mass via the formula E=mc^2, where E is energy, m is mass, and c is the speed of light. Given that the mass of the water produced is 1.10 x 10^-11 kg, substituting this value into the formula will provide the energy produced from the fuel.
different resource of energy in pakistan
The amount of thermal energy produced depends on the source of heat, the duration of heating, and the specific conditions of the system. To calculate the thermal energy produced, you would need to know the specific heat capacity of the material being heated, the mass of the material, and the temperature change that occurred. You can use the formula Q = mcΔT, where Q is the thermal energy produced, m is the mass of the material, c is the specific heat capacity, and ΔT is the temperature change.
Wind energy is produced by windmills. Windmills are essentially a type of generator that converts kinetic energy (motion energy) into electrical energy. Wind energy comes from the motion of the air. According to the Department of Energy, air over land heats up faster than air over water. When the warm air over land rises, the cooler air over water rushes in to replace it. This creates wind.
E = mc2 is used to calculate how much energy is produced when you convert matter to energy. The variables stand for E = Energy, m = mass, and c = speed of light. If you do the math correctly, you will see that a very small amount of mass will generate a very large amount of energy. The equation can be used to calculate the energy of an atomic bomb or a nuclear power plant where mass and energy are converted.
energy is not produced, created or destroyed - it is converted. in the case of the rollercoaster it could be from electrical energy from the motor to move it, or from gravitational energy as it goes down a slope. the formula for workig out the kinetic energy an object has is: [1/2 x mass x (velocity squared)]
Internally, they're pretty much the same. The difference is the operation expected of it - a hydraulic pump converts mechanical energy to fluid energy, whereas a hydraulic motor converts hydraulic energy to mechanical energy.
we can not tell how much wind is bein produced
Kinetic energy is a type of energy associated with the motion of an object. It is calculated using the formula: KE = 1/2 * mass * velocity^2. The amount of kinetic energy produced depends on the mass and velocity of the object in motion.
73 % is electrical energy
less then 1%