To convert from kilowatts (kW) to British Thermal Units (BTU) per hour, multiply by 3412. Therefore, a 5kW heater would produce 5 * 3412 = 17060 BTU per hour.
An electric heater works by passing an electric current through a high resistance wire, causing it to heat up and produce heat through a process called Joule heating. The heat is then transferred to the surrounding air through convection, warming up the space.
BTU is a measure of energy, while a kilowatt is a measure of power. Energy is power times time. Energy: measured in BTU or kilowatt-hours Power: measured in BTU/hour or kilowatts. 100,000 BTU equals about 29 kWh so a 1 kW heater produces about 3400 BTU per hour.
The number of BTUs needed to heat a room can vary based on factors like insulation, ceiling height, climate, etc. As a rough estimate, you can use the formula: 20 BTUs per square foot for a room with standard ceiling height. Therefore, for a 60 square foot room, you would need around 1,200 BTUs to heat it effectively.
No, the amount of BTUs needed to cool a house is different from heating it. Cooling typically requires fewer BTUs because it involves removing heat from the indoors to maintain a lower temperature, while heating involves adding heat to raise the temperature.
The amount of BTUs needed to heat a room depends on various factors such as insulation, ceiling height, climate, and desired temperature. As a rough estimate, for a moderately insulated room with an 8-foot ceiling in a cold climate, you would need around 20-25 BTUs per square foot. So for a 600 sqft room, you would need approximately 12,000-15,000 BTUs to heat it effectively.
A 100 pound propane tank has a capacity of 2,160,509 BTUs
BTUs, or British Thermal Units, measure energy rather than temperature directly. A rating of 5,000 BTUs typically indicates the heat output of an appliance, like an air conditioner or heater, rather than a specific temperature. For context, 5,000 BTUs can cool or heat a small room, but the actual temperature achieved will depend on factors like room size, insulation, and external conditions.
Know the number of BTUs recomended for the size area you need to heat. Know the safety specifications.
The "Mr. Heater F232000 MH9BX Buddy" portable propane heater has one of the highest BTU outputs for a portable heater, at 9,000 BTUs. If you need even more heat output, industrial propane heaters can go up to 400,000 BTUs or more for larger spaces.
A light bulb similar to a heater in that they both produce heat when in operation.
I would guess the thermostat I would guess the thermostat
The required BTUs for an outdoor patio heater typically range from 30,000 to 50,000 BTUs, depending on the size of the area you want to heat. For smaller spaces, a heater with around 30,000 BTUs can be sufficient, while larger areas may require heaters with higher outputs. Additionally, factors like wind exposure and desired temperature can influence the BTU needs. Always check the manufacturer's specifications for optimal performance based on your specific setup.
I don't think so because when we have a cold, it is best to keep oneself warm and thus the heater produce heat for us to keep warm. Unless we have a lousy heater which produce cold air instead of heat, haha!
4800 BTUs will 150 square feet.
An electric heater works by passing an electric current through a high resistance wire, causing it to heat up and produce heat through a process called Joule heating. The heat is then transferred to the surrounding air through convection, warming up the space.
There are two insulated heater elements that heat the water.
No , if you were to bypass the heater core , you would have no heat