The amount of propane needed to heat a 50 gallon water heater from 75 degrees to 105 degrees would depend on factors such as the efficiency of the water heater, the starting temperature of the water, and the ambient temperature. It is difficult to provide an exact amount without this information.
A gallon of water weighs about 8.34 pounds. So, a 50 gallon water heater full of water would weigh approximately 417 pounds.
about 100 lbs
A typical 30-gallon water heater weighs around 120-150 pounds when empty.
30 gallon $600 40 Gallon $700 50 gallon $950 75 gallon $1,200 -$1,500 100 gallon $2,300 - $2,800
The weight of a gallon of water at 229 degrees Fahrenheit would be approximately 8.33 pounds. This is because water's density changes with temperature, and at 229 degrees Fahrenheit, water is less dense compared to when it is at room temperature.
no
As long as the heater is made for propane.
To go completely propane, you would need to replace all gas appliances in your home with propane-powered alternatives, install a propane tank on your property, and have a professional connect the appliances to the tank. Make sure to follow local regulations and safety guidelines when making the switch.
A propane tankless water heater uses propane gas as a fuel source, while an electric tankless water heater uses electricity. Propane heaters typically have higher heating capacities and can be more energy-efficient, but they require a propane supply. Electric heaters are easier to install and maintain, but may have lower heating capacities and higher operating costs.
Propane tankless water heater may differ from a standard water heater with the following features; It has UMC-117 remote control and 10 feet of thermostat wire, it has freeze protection which is up to -30 degrees Fahrenheit. And It has a low nitrogen oxide emission standards.
An on-demand hot water heater powered by propane offers benefits such as energy efficiency, cost savings, and endless hot water supply.
To calculate the BTUs needed to raise the temperature of a 40-gallon water heater by 60 degrees Fahrenheit, you can use the formula: BTUs = gallons × temperature rise × 8.34. For a 40-gallon heater, it would be 40 gallons × 60°F × 8.34 BTU/gallon°F, resulting in approximately 20,016 BTUs. Therefore, it takes about 20,016 BTUs to achieve that temperature increase.
According to the Wikipedia entry for propane, liquid propane has thermal energy 91,600 BTU per gallon. So 1 therm which is 100,000 BTU will correspond to 100,000/91,600 gallons, result = 1.092 gallons.
100 gallon.
A gallon of water weighs about 8.34 pounds. So, a 50 gallon water heater full of water would weigh approximately 417 pounds.
probably more than one second
Usually when you purchase a water heater for the aquarium, It keeps the temp between 72-78 degrees. I have a ten gallon tank with a heater in it and have never had a problem.