0
It depends on the circuit design and ratings, and what you expect from the bulbs.
Bulbs connected in series with each other will have the same amount of current
flowing through each one, but possibly differing voltages dropped across them,
depending on their ratings. Also, with bulbs connected in series, if any single
bulb burns out, or is switched off, or is removed from its socket, then all of the
bulbs in the series circuit go dark.
Bulbs connected in parallel will have the same voltage across each one, but
possibly differing currents through them, depending on their ratings.
Always check what type of circuit is in use and what it is designed to do, and
ensure the appropriate rating of lamps are used.
What else can I help you with?
How must the light bulb be connected in order for it to light up?
The light bulb must be connected in a closed circuit with a power source, such as a battery or electrical outlet, for it to light up. This means that the positive terminal of the power source must be connected to the positive terminal of the light bulb, and the negative terminal of the power source must be connected to the negative terminal of the light bulb. This allows the flow of electricity to power the light bulb and make it light up.
Three different bulbs are connected in series when switch is closed the last bulb does not glow why?
When bulbs are connected in a series circuit, each bulb depends on the voltage from the previous bulb to light up. If the last bulb doesn't glow, it may indicate that there is a break in the circuit somewhere before that bulb, such as a loose connection or a blown fuse. This interruption in the circuit would prevent the flow of electricity to the last bulb, causing it not to light up.
Which bulb will glow at first when 3 bulbs are connected in series and switch is connected after 1 bulb?
The bulb that will glow first when 3 bulbs are connected in series and the switch is connected after 1 bulb is the second bulb in the series. The current flows through all the bulbs in a series circuit, but the second bulb experiences the full potential difference first as it is connected directly to the source.
How could Series circuit be used in a sentence?
In a series circuit, the components are connected in a single path. For example, Christmas lights are often connected in a series circuit where the failure of one bulb can cause the entire string to go out.
Will the current in a light bulb connected to a 200-v source be greater or less than when the same bulb is connected to a 110-v circuit?
The current in the light bulb will be greater when connected to the 200-v source compared to the 110-v circuit, assuming the resistance of the light bulb remains constant. This is because current is directly proportional to voltage in an electrical circuit according to Ohm's Law (I = V/R), so a higher voltage will result in a greater current flow through the bulb.
When you remove a bulb from a three bulb circuit and the other two bulbs go off then the bulbs must have been connected in?
help :(
How must the light bulb be connected in order for it to light up?
The light bulb must be connected in a closed circuit with a power source, such as a battery or electrical outlet, for it to light up. This means that the positive terminal of the power source must be connected to the positive terminal of the light bulb, and the negative terminal of the power source must be connected to the negative terminal of the light bulb. This allows the flow of electricity to power the light bulb and make it light up.
Why the bulb is not lighting when one wire or terminal is not connected?
When one wire or terminal is not connected to a light bulb, it is not possible for electricity to complete the circuit. When a circuit is not completed, the bulb will not light. An off switch, for example, breaks the circuit.
Based on what you have seen what must be true for a circuit to light a bulb?
There must be a current through the bulb in order for it to glow.
What components do you need to make a simple series circuit to light on bulb?
You need a Battery, Light Bulb, Ammeter, Switch.
Is this your experiment with physics?
· to show the effect on a bulb if a resistance is connected in series with it in the circuit.
The rules of connecting voltmeter and ammeters in the circuit?
Connect ammeter in series and voltmeter in parallel to the circuit
What meter must NEVER be connected to a circuit when the circuit power is turned on?
An Ohmmeter.
Three different bulbs are connected in series when switch is closed the last bulb does not glow why?
When bulbs are connected in a series circuit, each bulb depends on the voltage from the previous bulb to light up. If the last bulb doesn't glow, it may indicate that there is a break in the circuit somewhere before that bulb, such as a loose connection or a blown fuse. This interruption in the circuit would prevent the flow of electricity to the last bulb, causing it not to light up.
Which bulb will glow at first when 3 bulbs are connected in series and switch is connected after 1 bulb?
The bulb that will glow first when 3 bulbs are connected in series and the switch is connected after 1 bulb is the second bulb in the series. The current flows through all the bulbs in a series circuit, but the second bulb experiences the full potential difference first as it is connected directly to the source.
Why does a bulb in a circuit not work?
A light bulb is not lit when the swtich is not connected to the wire becasue there is no flow of electricity, specifically, flow of electrons. By disconnecting the wire, the bulb is no longer connected to the electricity source.
How could Series circuit be used in a sentence?
In a series circuit, the components are connected in a single path. For example, Christmas lights are often connected in a series circuit where the failure of one bulb can cause the entire string to go out.
