answersLogoWhite

0

It would be best to be higher than the buildings in the residential area, so that the rotor is operating in clear air rather than shielded by buildings

User Avatar

Wiki User

16y ago

What else can I help you with?

Continue Learning about Physics

Turbine negative expansion and positive expansion?

Negative expansion in a turbine occurs when the turbine suffers from a loss of power output due to factors like fouling or damage. Positive expansion, on the other hand, would refer to the ideal scenario where a turbine operates efficiently and produces the expected power output.


How many kilowatts would a 600 watt wind turbine produce per month?

To calculate the kilowatt-hours produced by a wind turbine in a month, you can use the formula: Monthly energy production (kWh) = Wattage of the turbine (W) * 24 hours * 30 days / 1000 For a 600 watt wind turbine, the calculation would be: 600 W * 24 hours * 30 days / 1000 = 432 kWh per month


What is a machine powered by rotating blades?

Assuming "powered by" means produces power not uses power a partial list would be:wind turbinesair turbines (dentist's drills)steam turbineshydroelectric power turbineswater wheels at millssome strandbeestsjet engines


Which alternative energy source do you think would be most useful for the place where you live?

Solar energy would be the most useful alternative energy source for my location due to ample sunlight throughout the year. This would help reduce dependency on traditional fossil fuels and lower carbon emissions in my community. Additionally, solar energy is becoming more cost-effective and scalable, making it a practical choice for residential and commercial use.


How much power in watts could you get out of the turbine with a potential energy of 19600 joules if it were perfectly efficient?

If the turbine were perfectly efficient, all of the potential energy of 19600 joules would be converted into mechanical energy. To convert this to power output in watts, you would divide the energy by the time taken for the conversion to occur. If the conversion happened in 10 seconds, the power output would be 1960 watts (19600 joules / 10 seconds).

Related Questions

How much less Co2 would an average household produce if they had a residential wind turbine?

I would say... about 20% less


Would a turbine be a chemical or physical change?

Turbine is not a change, a turbine is a mechanical device.


What would possess someone to actually go out and buy a residential wind turbine?

A wind turbine converts kinetic energy from the wind into mechanical energy which can be used as commercially electric power or electricity for your house. It is slowly becoming more popular because it creates a large amount of electricity at a cheap price.


Why would a turbine be used instead of a water wheel?

a turbine would be used instead of a water wheel because a turbine does not use as much energy and it uses the wind to generate it.


Where would a wind turbine be found?

in space


Why would you not heat the steam coming out of turbine and feedback to turbine?

Steam is redirected back into the boiler from the high-pressure turbine for reheating, but the steam from the low-pressure turbine enters into a condenser to become water again.


How much space would a land or homeowner need to operate wind turbine generators?

The most important thing to know about is your local laws. They will determine how much space they require for a wind turbine. However, half an acre of land is sufficinet if you are allowed to have one. It depends on how much power you want to generate, and if your land has sufficient wind (winds that are at least 10mph and sustained). Power generated is related to turbine size and spacing requirements. I'll assume you want a single residential sized wind turbine with about a 30 ft blade and a 120 foot height. That would need about 250 square feet of clear space.


How long are wind turbine?

I would say that it would be as long as 300ft


If a wind turbine designed for residential use is rated at 15 kWh would it provide enough electircal power for a typical home assuming everything is electric?

Not very often. A typical all-electric house service is 200 amps which is 48 kw.


Why use journal bearing in turbine?

putting a journal bearing at each end of the turbine rotor or shaft would be to support it.


How do you can control water turbine?

Well Really It Would Depend On What Type Of Water Turbine You HAd Yuo Should Contact The Manufacturer.


Where would be a good location to locate a wind turbine?

In the sea