answersLogoWhite

0

The mechanical advantage of the machine is 2. Mechanical advantage is calculated by dividing the output force by the input force. In this case, 80 N (output force) divided by 40 N (input force) equals 2.

User Avatar

AnswerBot

1y ago

What else can I help you with?

Related Questions

What should be in an Software Requirements Specification?

nWhat should be in an SRS?


Nwhat letter comes next in this sequence zxcvbn?

m,./ from the bottom row of a keyboard


What is lonarid nwhat is the active ingredient in the prescription drug lonarid n?

codeine.. a substance produced from opium


When an approved secure room of TS vault is not under the personal observation and control of an authorized person nwhat must be done?

In that case the room must be secured.


NWhat subject did Bella Swan failed?

Bella didn't actually fail any class, she almost failed calculus but Edward helped her pass.


Which nwhat is not a physical injury you can prevent by warming up and cooling down properly?

One example of a non-physical injury that can be prevented by warming up and cooling down properly is muscle fatigue or soreness. A thorough warm-up can help prepare the muscles for exercise and reduce the likelihood of excessive fatigue or soreness post-workout. Cooling down allows for a gradual transition from high-intensity activity to rest, which can facilitate recovery and reduce muscle soreness.


A rocket lifting off the earths surface weighed 5711 N and its motor developed an upward force of 22214 Nwhat was the rockets acceleration?

From the weight, you can calculate the mass - divide the weight by 9.8, the gravity on Earth. Subtract the forces, since one pushes upwards, the other downward. Finally, divide this by the mass: force = mass x acceleration.


Nwhat is the punishment of child abuse?

Well, the sentence varies state to state. Some states there is a Maximum and Minimum sentance. Other states it depends on the brutality,lasting effects and total outcome. I was looking for the same answer and stumbled upon this. http://www.cga.ct.gov/2000/rpt/olr/htm/2000-r-1064.htm


How do you implement stack using singly linked list?

struct node { int info; struct node *link; } *top=NULL; int main() { int choice; while(1) { printf("1.Push\n"); printf("2.Pop\n"); printf("3.Display\n"); printf("4.Quit\n"); printf("Enter your choice : ") ; scanf("%d", &choice); switch(choice) { case 1: push(); break; case 2: pop(); break; case 3: display(); break; case 4: exit(1); default : printf("Wrong choice\n"); }/*End of switch */ }/*End of while */ return 0; }/*End of main() */ void push() { struct node *tmp; int pushed_item; tmp = malloc(sizeof(struct node)); printf("Input the new value to be pushed on the stack : "); scanf("%d",&pushed_item); tmp->info=pushed_item; tmp->link=top; top=tmp; }/*End of push()*/ void pop() { struct node *tmp; if(top == NULL) printf("Stack is empty\n"); else { tmp=top; printf("Popped item is %d\n",tmp->info); top=top->link; free(tmp); } }/*End of pop()*/ void display() { struct node *ptr; ptr=top; if(top==NULL) printf("Stack is empty\n"); else { printf("Stack elements :\n"); while(ptr!= NULL) { printf("%d\n",ptr->info); ptr = ptr->link; }/*End of while */ }/*End of else*/ }/*End of display()*/


How do you make a program that helps a money converter determine the value of a persons money in the selected currency?

#include<stdio.h> #include<string.h> main(){ char Peso='P'; char Dollar='USD'; char Euro='E'; char currency[5]; float amount=0; char currency2[5]; float equivalent; printf("In what currency is the person's money?\n\t(P)eso\n\t(USD)ollar\n\t(E)uro\n"); scanf("%s",currency); printf("\nWhat is the amount?\n"); scanf("%f",&amount); printf("\nIn what currency do you want it changed?\n\t(P)eso\n\t(USD)ollar\n\t(E)uro\n"); scanf("%s",currency2); if(strcmp(currency,"P")==0 && strcmp(currency2,"USD")==0){ equivalent=amount*0.0237; printf("The equivalent of his money is P%.2f.\n\n",equivalent); } else if(strcmp(currency,"P")==0 && strcmp(currency2,"E")==0){ equivalent=amount*0.0187; printf("The equivalent of his money is P%.2f.\n\n",equivalent); } else if(strcmp(currency,"USD")==0 && strcmp(currency2,"P")==0){ equivalent=amount*42.0006; printf("The equivalent of his money is P%.0f.\n\n",equivalent); } else if(strcmp(currency,"USD")==0 && strcmp(currency2,"E")==0){ equivalent=amount*0.7874; printf("The equivalent of his money is P%.2f.\n\n",equivalent); } else if(strcmp(currency,"E")==0 && strcmp(currency2,"P")==0){ equivalent=amount*53.4804; printf("The equivalent of his money is P%.2f.\n\n",equivalent); } else if(strcmp(currency,"E")==0 && strcmp(currency2,"USD")==0){ equivalent=amount*1.27; printf("The equivalent of his money is P%.2f.\n\n",equivalent); } else printf("\nWrong Input!\n\n"); } #include<stdio.h> #include<string.h> main(){ int SUV=3500; int Car=2500; int Motorcycle=900; int Truck=4000; char type[5]; char registration[5]; int ans; printf("Please select the type of vehicle:\n\tS - SUV\n\tC - Car\n\tM - Motorcycle\n\tT - Truck\n"); scanf("%s",type); if(strcmp(type,"S")==0 strcmp(type,"s")==0){ printf("\nIs vehicle registered on time?Y/N\n"); scanf("%s",registration); if(strcmp(registration,"Y")==0 strcmp(registration,"y")==0){ printf("\nTotal Reaistration fee is P%d.\n\n",SUV); }else if(strcmp(registration,"N")==0 strcmp(registration,"n")==0){ ans=(3500*0.1)+3500; printf("\nTotal Registration fee is P%d.\n\n",ans); }else printf("\ninvalid!\n\n"); }else if(strcmp(type,"C")==0 strcmp(type,"c")==0){ printf("\nIs vehicle registered on time?Y/N\n"); scanf("%s",registration); if(strcmp(registration,"Y")==0 strcmp(registration,"y")==0){ printf("\nTotal Reaistration fee is P%d.\n\n",Car); }else if(strcmp(registration,"N")==0 strcmp(registration,"n")==0){ ans=(2500*0.1)+2500; printf("\nTotal Registration fee is P%d.\n\n",ans); }else printf("\ninvalid!\n\n"); }else if(strcmp(type,"M")==0 strcmp(type,"m")==0){ printf("\nIs vehicle registered on time?Y/N\n"); scanf("%s",registration); if(strcmp(registration,"Y")==0 strcmp(registration,"y")==0){ printf("\nTotal Reaistration fee is P%d.\n\n",Motorcycle); }else if(strcmp(registration,"N")==0 strcmp(registration,"n")==0){ ans=(900*0.1)+900; printf("\nTotal Registration fee is P%d.\n\n",ans); }else printf("\ninvalid!\n\n"); }else if(strcmp(type,"T")==0 strcmp(type,"t")==0){ printf("\nIs vehicle registered on time?Y/N\n"); scanf("%s",registration); if(strcmp(registration,"Y")==0 strcmp(registration,"y")==0){ printf("\nTotal Registration fee is P%d.\n\n",Truck); }else if(strcmp(registration,"N")==0 strcmp(registration,"n")==0){ ans=(4000*0.1)+4000; printf("\nTotal Registration fee is P%d.\n\n",ans); }else printf("\ninvalid!\n\n"); }else printf("\nInvalid Input!\n\n"); } #include<stdio.h> #include<string.h> main(){ char status[5]; int numChildren; int tax; int i=1; printf("Status of Person: S - Single\n\t\t M - Married\n\t\t H - Head of the Family\n"); scanf("%s",status); while(i<=status){ i++; } if(strcmp(status,"S")==0 strcmp(status,"s")==0){ tax=20000; printf("\nTotal Tax Exemption: P%d\n\n",tax); } else if(strcmp(status,"M")==0 strcmp(status,"m")==0){ printf("\nNo. of Children Under 18:\n"); scanf("%d",&numChildren); if(numChildren>0){ tax=32000+(8000*numChildren); printf("\nTotal Tax Exemption: P%d\n\n",tax); }else{ tax=32000; printf("Total Tax Exemption: P%d\n\n",tax); } } else if(strcmp(status,"H")==0 strcmp(status,"h")==0){ tax=25000; printf("Total Tax Exemption: P%d\n\n",tax); } else printf("\nWrong Choice!\n\n"); }


How do you make a program that helps a money converter determine the value of a person's money in the selected currency?

#include<stdio.h> #include<string.h> main(){ char Peso='P'; char Dollar='USD'; char Euro='E'; char currency[5]; float amount=0; char currency2[5]; float equivalent; printf("In what currency is the person's money?\n\t(P)eso\n\t(USD)ollar\n\t(E)uro\n"); scanf("%s",currency); printf("\nWhat is the amount?\n"); scanf("%f",&amount); printf("\nIn what currency do you want it changed?\n\t(P)eso\n\t(USD)ollar\n\t(E)uro\n"); scanf("%s",currency2); if(strcmp(currency,"P")==0 && strcmp(currency2,"USD")==0){ equivalent=amount*0.0237; printf("The equivalent of his money is P%.2f.\n\n",equivalent); } else if(strcmp(currency,"P")==0 && strcmp(currency2,"E")==0){ equivalent=amount*0.0187; printf("The equivalent of his money is P%.2f.\n\n",equivalent); } else if(strcmp(currency,"USD")==0 && strcmp(currency2,"P")==0){ equivalent=amount*42.0006; printf("The equivalent of his money is P%.0f.\n\n",equivalent); } else if(strcmp(currency,"USD")==0 && strcmp(currency2,"E")==0){ equivalent=amount*0.7874; printf("The equivalent of his money is P%.2f.\n\n",equivalent); } else if(strcmp(currency,"E")==0 && strcmp(currency2,"P")==0){ equivalent=amount*53.4804; printf("The equivalent of his money is P%.2f.\n\n",equivalent); } else if(strcmp(currency,"E")==0 && strcmp(currency2,"USD")==0){ equivalent=amount*1.27; printf("The equivalent of his money is P%.2f.\n\n",equivalent); } else printf("\nWrong Input!\n\n"); } #include<stdio.h> #include<string.h> main(){ int SUV=3500; int Car=2500; int Motorcycle=900; int Truck=4000; char type[5]; char registration[5]; int ans; printf("Please select the type of vehicle:\n\tS - SUV\n\tC - Car\n\tM - Motorcycle\n\tT - Truck\n"); scanf("%s",type); if(strcmp(type,"S")==0 strcmp(type,"s")==0){ printf("\nIs vehicle registered on time?Y/N\n"); scanf("%s",registration); if(strcmp(registration,"Y")==0 strcmp(registration,"y")==0){ printf("\nTotal Reaistration fee is P%d.\n\n",SUV); }else if(strcmp(registration,"N")==0 strcmp(registration,"n")==0){ ans=(3500*0.1)+3500; printf("\nTotal Registration fee is P%d.\n\n",ans); }else printf("\ninvalid!\n\n"); }else if(strcmp(type,"C")==0 strcmp(type,"c")==0){ printf("\nIs vehicle registered on time?Y/N\n"); scanf("%s",registration); if(strcmp(registration,"Y")==0 strcmp(registration,"y")==0){ printf("\nTotal Reaistration fee is P%d.\n\n",Car); }else if(strcmp(registration,"N")==0 strcmp(registration,"n")==0){ ans=(2500*0.1)+2500; printf("\nTotal Registration fee is P%d.\n\n",ans); }else printf("\ninvalid!\n\n"); }else if(strcmp(type,"M")==0 strcmp(type,"m")==0){ printf("\nIs vehicle registered on time?Y/N\n"); scanf("%s",registration); if(strcmp(registration,"Y")==0 strcmp(registration,"y")==0){ printf("\nTotal Reaistration fee is P%d.\n\n",Motorcycle); }else if(strcmp(registration,"N")==0 strcmp(registration,"n")==0){ ans=(900*0.1)+900; printf("\nTotal Registration fee is P%d.\n\n",ans); }else printf("\ninvalid!\n\n"); }else if(strcmp(type,"T")==0 strcmp(type,"t")==0){ printf("\nIs vehicle registered on time?Y/N\n"); scanf("%s",registration); if(strcmp(registration,"Y")==0 strcmp(registration,"y")==0){ printf("\nTotal Registration fee is P%d.\n\n",Truck); }else if(strcmp(registration,"N")==0 strcmp(registration,"n")==0){ ans=(4000*0.1)+4000; printf("\nTotal Registration fee is P%d.\n\n",ans); }else printf("\ninvalid!\n\n"); }else printf("\nInvalid Input!\n\n"); } #include<stdio.h> #include<string.h> main(){ char status[5]; int numChildren; int tax; int i=1; printf("Status of Person: S - Single\n\t\t M - Married\n\t\t H - Head of the Family\n"); scanf("%s",status); while(i<=status){ i++; } if(strcmp(status,"S")==0 strcmp(status,"s")==0){ tax=20000; printf("\nTotal Tax Exemption: P%d\n\n",tax); } else if(strcmp(status,"M")==0 strcmp(status,"m")==0){ printf("\nNo. of Children Under 18:\n"); scanf("%d",&numChildren); if(numChildren>0){ tax=32000+(8000*numChildren); printf("\nTotal Tax Exemption: P%d\n\n",tax); }else{ tax=32000; printf("Total Tax Exemption: P%d\n\n",tax); } } else if(strcmp(status,"H")==0 strcmp(status,"h")==0){ tax=25000; printf("Total Tax Exemption: P%d\n\n",tax); } else printf("\nWrong Choice!\n\n"); }