0
What else can I help you with?
A student drops a stone into a mine shaft It takes 3 seconds for the stone to hit the bottom of the shaft How deep is the mine?
The depth of the mine can be calculated using the formula: distance = 0.5 * acceleration due to gravity * time^2. Given that the time taken for the stone to hit the bottom is 3 seconds, we can substitute this into the formula along with the acceleration due to gravity (9.8 m/s^2) to calculate the depth of the mine. The depth of the mine would be approximately 44.1 meters.
If you drop a stone into a well that is 118.5 m deep how soon after you drop the stone will you hear it hit the bottom of the well?
About 5.26 seconds. (almost 4.92 seconds to hit, 0.35 sec for the sound to return)You need to find how long it takes for the stone to drop to the water and makean audible 'sploosh', and then find how long it takes for the sound to reach youfrom the depths. The acceleration g is about 9.8 m/sec2.Time to sploosh:x = 1/2 g T2118.5 = 4.9 T2T = sqrt(118.5/4.9) secondsTime for the sound to return to the top: (Use 340 meters per second)118.5/340 secondsTotal time between the drop and hearing the sploosh:sqrt(118.5/4.9) + (118.5/340 ) = 5.26 seconds(rounded)
Is there more pressure at the bottom of a bathtub of water 30cm deep or at a bottom of a pitcher of water 35cm deep?
The pressure at the bottom of the pitcher of water 35cm deep is higher than at the bottom of the bathtub of water 30cm deep. Pressure in a fluid increases with depth, so the deeper the water column, the greater the pressure at the bottom. This is due to the weight of the water above exerting a force on the bottom.
A spelunker drops a stone from rest into a hole The speed of sound is 343 ms in air and the sound of the stone striking the bottom is heard 5.71 s after the stone is dropped How deep is the hole?
Using the speed of sound in air and the time it takes for the sound to be heard, we can calculate the total distance the sound travels. Since the sound must travel down and back up the hole, we divide the total distance by 2 to find the depth of the hole. The calculated depth of the hole is approximately 980 meters.
Where would you weigh the most at the beach at the bottom of a deep mine or on a mountain top?
You Would Weigh The Most At The Bottom Of A Deep Mine. Reason Being is that you would weigh the same on top of a mountain as mush as you would on a beach because your are on the ground and gravity affects you the same when your there.
It took 17.89 seconds for a rock to hit the bottom of the canyon how deep is the canyon?
It takes 175,32 seconds
If a rock takes 6 seconds to hit the bottom of a HOLE how far is the bottom?
about five metres deep
A student drops a stone into a mine shaft It takes 3 seconds for the stone to hit the bottom of the shaft How deep is the mine?
The depth of the mine can be calculated using the formula: distance = 0.5 * acceleration due to gravity * time^2. Given that the time taken for the stone to hit the bottom is 3 seconds, we can substitute this into the formula along with the acceleration due to gravity (9.8 m/s^2) to calculate the depth of the mine. The depth of the mine would be approximately 44.1 meters.
If you drop a stone into a well that is 118.5 m deep how soon after you drop the stone will you hear it hit the bottom of the well?
About 5.26 seconds. (almost 4.92 seconds to hit, 0.35 sec for the sound to return)You need to find how long it takes for the stone to drop to the water and makean audible 'sploosh', and then find how long it takes for the sound to reach youfrom the depths. The acceleration g is about 9.8 m/sec2.Time to sploosh:x = 1/2 g T2118.5 = 4.9 T2T = sqrt(118.5/4.9) secondsTime for the sound to return to the top: (Use 340 meters per second)118.5/340 secondsTotal time between the drop and hearing the sploosh:sqrt(118.5/4.9) + (118.5/340 ) = 5.26 seconds(rounded)
How long does it take to get to the bottom of Challenger Deep?
It takes approximately 2 to 2.5 hours to descend to the bottom of Challenger Deep, the deepest known point in the Earth's seabed, using a submersible. The return trip to the surface takes a similar amount of time.
It takes 6 s for a stone to fall to the bottom of a mine shaft. How deep is the shaft?
Ignoring air resistance, or bouncing off the sides of the shaft on the way down ...-- Speed when you let it go = 0-- Speed after 6 seconds = 6 G = 58.84 meters per second-- Average speed = 1/2 (0 + 58.84) = 29.42 meters per second-- In 6 seconds, at an average speed of 29.42 meters per second,it fell 176.5 meters.
When was The Bottom Deep created?
The Bottom Deep was created in 2011.
Which stone not deep in water?
The stone name is never deep in water hajra aswad this stone come from heaven and present in saudia arabia
How deep is Big Stone Lake?
Big Stone Lake is 965 ft. (294 m) deep! :0
What is the duration of Bells from the Deep?
The duration of Bells from the Deep is 3600.0 seconds.
What is the duration of A Sheep in the Deep?
The duration of A Sheep in the Deep is 360.0 seconds.
What is the duration of A Noise from the Deep?
The duration of A Noise from the Deep is 600.0 seconds.
