answersLogoWhite

0

If pulley A is moved clockwise, pulley C will also turn clockwise at half the speed of pulley A due to the belt connection. This is because pulley C has a larger diameter than pulley A, causing it to rotate slower while maintaining the same linear speed.

User Avatar

AnswerBot

1y ago

What else can I help you with?

Continue Learning about Physics

In the picture below if a twisted pulley A turns clockwise at 15 rpm how fast and in what direction will pulley B turn?

Pulley B will turn counterclockwise at 15 rpm since it is connected to pulley A with a twisted belt. The direction of rotation is opposite between the two pulleys due to the arrangement of the twisted belt.


In the picture below if pulley A turns clockwise at 15 rpm how fast and in what direction will pulley B turn?

Pulley B will turn counterclockwise at 15 rpm since it is connected to pulley A by the belt. Both pulleys will turn at the same speed since they are connected by the belt.


What is the opposite of a pulley?

There is no opposite machine to a pulley. However, a jack or hydraulic lift essentially does the reverse, lifting from below rather than from above.


Why does earth spin counter clockwise?

Almost all of the material that formed the Solar system revolved around the Sun in one direction. This represents the conservation of angular momentum when the material contracted to form the Sun and its planetary disk. Since then, collisions and localized gravity have created exceptions to the general counter-clockwise rule (Venus spins slowly clockwise on its axis). The Earth rotates (spins) on its axis counter-clockwise, and orbits the Sun counter-clockwise as well, as viewed from the North Pole of the Earth or Sun. These are arbitrary concepts of "above" and "below" the plane of the Solar System. The Moon also revolves around the Earth counter-clockwise.


Can you show a picture of a thermostat?

Go to link below.

Related Questions

In the picture below if a twisted pulley A turns clockwise at 15 rpm how fast and in what direction will pulley B turn?

Pulley B will turn counterclockwise at 15 rpm since it is connected to pulley A with a twisted belt. The direction of rotation is opposite between the two pulleys due to the arrangement of the twisted belt.


In the picture below if pulley A turns clockwise at 15 rpm how fast and in what direction will pulley B turn?

Pulley B will turn counterclockwise at 15 rpm since it is connected to pulley A by the belt. Both pulleys will turn at the same speed since they are connected by the belt.


How do you loosen the idler pulley on a 1994 landcruiser?

The idler pulley is attached by a 14mm hex head bolt. Although the pulley turns counter-clockwise, suggesting that the bolt might be left-handed threads, it is in fact right-handed. A 1/2" drive ratchet with a 14mm socket will loosen the bolt if turned in a counter-clockwise direction. Be sure and loosen the belt tensioner, located below the alternator, and loosen but not remove the other alternator bolts, prior to removing the idler pulley.


Which direction would the earth appear to spin if you could observe it from the below the south pole?

clockwise


Which direction would the earth appear to spin if you could observe it from below the south pole?

If you observe the Earth from below the South Pole, it would appear to be spinning in a counterclockwise direction.


How do you loosen serpentine belt tension on a 2000 s10?

Tensioner pulley below the alternator. Should be a 14 or 15mm socket and turn counter-clockwise.


Why does the toliet water flush the oppoiste way in Mexico?

If you are above the equator, they flush clockwise. If you live below the equator, they flush counter clockwise. This is because of the Coriolis effect and the direction seawater flows in the ocean. Likewise to the toilet, the oceanwater travels in a clockwise pattern above the equator, and a counter clockwise pattern below the equator.


How do you time a 2001 daewoo?

There's a mark on the bottom of the hole in which the crankshaft pulley bolt goes into. That mark has to be aligned with the mark on the oil pan below it. The camshafts have marks on them which has to be aligned so they face each other. Install the timing belt, adjust and tighten the tensioner located above the crankshaft pulley and to the right of the water pump pulley, then rotate the crankshaft twice in a clockwise direction. When done, the camshafts should end up back where they started.


From what angle is the clockwise or counterclockwise motion of a ceiling fan judged?

It is assumed that you will be standing below it to determine the clockwise or counterclockwise direction. This is to avoid confusion when discussing the direction of the air due to the pitch on the blades. Since the pitch is fixed, the only variable left is the rotation direction of the blades.


Looking at a ceiling fan which way is clock wise?

If you are looking up at the fan clockwise will be to the right. people make there own answer they might not be right so don't believe them


What do you call the little pulley on a dodge hemi that is below and to the right of the tensioner pulley?

the idler pulley.


I can't get the alternator belt tight on a 1989 Chrysler Le baron?

if you are looking at the alt. the pulley below and to the left is the pensioner pulley get a i think 5/8 wrench turn clockwise. it will be alot less difficult if there are to people. some one pull the other slips on the belt.... if this dose not make tight you may need to replace pulley