No, it is not possible to jump start a car with the positive cable connected first and the negative cable connected second. The correct order is to connect the positive cable first and then the negative cable.
Yes, it is possible for the percent difference to be negative when comparing two values. This occurs when the second value is greater than the first value, resulting in a negative percentage difference.
No, entropy production cannot be negative according to the second law of thermodynamics, which states that entropy always increases in a closed system.
Sure. That just means that when you set up the problem, you indicated angles to be measured in a certain direction from the reference point, and the answer turned out to be an angle in the other direction from the reference.
The sign determines the direction of flow of electrons. This matters for direct current appliances and most things with computer chips in them, since memory storage, logic chips, diodes, LEDs, etc require current from one direction to operate. AC however, varies from positive to negative voltage sixty times per second (in the US- 60 Hz) which allows the power to transmit further distances through powerlines than DC would allow.Additional AnswerIt's important to understand that 'voltage' is another word for 'potential difference'. You cannot apply the terms 'positive' and 'negative', in the sense of 'polarity' or 'charge' to a potential difference or voltage. You cannothave a 'positive voltage' or a 'negative voltage' in this sense.'Positive' and 'negative', in the sense of polarity or charge can, however, be applied to potential. For example, you can say that an object has a "potential of +100 V or -100 V" with respect to another object. What you cannot say is that there is a potential difference of +100 V or -100 V between the two objects.The key to understanding this is that 'voltage' is another word for 'potential difference', NOT 'potential'. So you CANNOT have a 'positive or negative voltage' because we cannot have a 'positive or negative potential difference'.We can, though, apply the terms 'positive' or 'negative', in the sense of 'direction' to potential difference (or voltage). For example, we could arbitrarily apply a 'positive' direction to a voltage which acts clockwise around a closed loop, and a 'negative' direction to another voltage which acts counterclockwise around the same loop.So you need to sort out in your mind exactly what you mean by 'positive' and 'negative': charge (or polarity) or direction? And then re-phrase your question.
The bulb that will glow first when 3 bulbs are connected in series and the switch is connected after 1 bulb is the second bulb in the series. The current flows through all the bulbs in a series circuit, but the second bulb experiences the full potential difference first as it is connected directly to the source.
Note: When interconnecting A200 batteries (cells), they must be identical in voltage and amp rating! Batteries may be connected in series. The positive terminal of the first battery is connected to the negative terminal of the second battery; the positive terminal of the second is connected to the negative of the third, and so on. The voltage of the assembled battery is the sum of the individual batteries. The batteries are connected: + to - to + to - to + to -, etc. The capacity of the battery is unchanged. Batteries may also be connected in parallel. The positive terminal of the first battery is connected to the positive terminal of the second battery, the positive terminal of the second is connected to the positive of the third; the negative terminal of the first battery is connected to the negative terminal of the second battery, the negative terminal of the second is connected to the negative of the third and so on. The batteries are connected: + to + to + and - to - to -. In this configuration, the capacity is the sum of the individual batteries and voltage is unchanged.
You just connect them in Parallel. Two 12 volt batteries connected in parallel will output 12 volts. Two connected in Series will output 24 volts. Just connect the negative terminal on the first battery to the negative on the second battery. Then connect the positive terminal on first battery to the positive on the second battery. Connect the cables to the second battery, positive to positive and negative to negative. Click the link for a diagram.
positive 49 Because a negative times a negative is a positive. -7*-7=49. positive * positive = positive negative * negative= positive positive * negative = Negative
in parallel circuit passive components such as resistor capacitor and inductor are connected in such away tht all components positive sided terminals are connected together and similarly negative sided terminals. and then positive terminal of the source is connected to positive side and vice versa.while in case of series circuit negative terminal of first component is connected to the positive terminal of the second component and so on and then source is connected
I can if I charge 2 of them at a time. Most 24 volt chargers also have a 12 volt setting. What is hard to find is a 32 volt charger. We can charge a 12V battery with 24V charger, by connecting two 12V batteries in series i. e. the negative terminal of the first battery is connected to the positive terminal of the second, now the charger positive terminal is connected to the first battery positive terminal and the negative terminal of the charger is connected to the negative terminal of the second battery.
The coordinates must be as follows: First quadrant: positive, positive Second quadrant: negative, positive Third quadrant: negative, negative Fourth quadrant: positive, negative
It is positive. In relation to oxygen at least.
No a negative plus a negative is not a positive answer. example. -5+-2=-7 but if you are subtracting a negative number from a negative, then the second negative number would become a positive. example. -5 - -2= -5+2= =-3
A Bulb can be connected in a series in such a way that the energy source which is applied want to flow equally across the bulbs connected in series. A Bulb has to knobes or holds in which we supply the power. Assume one knob as a positive voltage absorbing source and other has a negative voltage absorbing source. When we connected in such a way that we can apply the voltage continuously in which the bulb will blow easily. When two or more bulbs are connected in series like end of the knob of one bulb i.e., negative to the next positive of the next bulb in series and negative of second bulb to the positive of the third bulb. Then the voltage splits equally across the bulbs connected.
It really depends on who you ask; It is positive by letting the world get connected in just a second where without it it would take days, weeks, months just to talk to the person or people. It was negative by everyone using their devices every second of the day, they don't even pay attention to where they are going. Overall it just depends on who you ask.
One positive one negative (apex)
the answer is negative number It depends on the second number because in 6minus-7. the seven would turn positive and therefore the answer is positive. Because you would add the opposite.