Bakelite is an insulator. It is a type of synthetic resin that does not conduct electricity due to its molecular structure, making it suitable for use in electrical insulation and other applications where electrical conductivity is not desired.
Its a insulator
A seashell is typically considered an insulator because it does not easily conduct electricity. The material of the seashell is not a good conductor of electricity due to its high resistance.
Lead is a metal and is considered a good conductor of electricity. It is not a semiconductor or insulator.
Copper - best conductor Glass - moderate insulator Rubber - good insulator
An insulator for heat and (less so) for electricity. A conductor for sound and vibration.
bakelite
The poorest insulator would be the best conductor, which is one of the noble metals. Bakelite is a fairly good insulator, not too long ago electrical fittings were made from it.
It depends, if the Bakelite is dry, it won't conduct electricity, however if it is wet and a high enough voltage is applied to it, it might conduct electricity.
All materials can conduct some electricity. Bakelite, by Westinghouse, is considered an insulator in ambient conditions because it has specific resistivity in the range of many megohms per unit volume. Depending on the physical shape of the Bakelite and the amount of voltage impressed upon it, Bakelite may break down (loose its insulating properties). Under normal industrial conditions Bakelite is considered an insulator.
Clean and dry Bakelite is a such a good insulator it would not be possible to use it to make a conductor of electricity.However if the piece of Bakelite was sprayed with water all over and a high enough voltage was applied to it, the water (not the Bakelite) would conduct electricity.Another possible answer is that if the Bakelite was made as thin as, say, some cigarette paper, and if a very high voltage was put across its thickness, the Bakelite would then break down and it would no longer be a good insulator. The burnt Bakelite could then conduct an electric current. Probably several hundreds or even thousands of volts would be needed to do that, but the resulting burnt stuff is not the same material as the clean and dry Bakelite we started with!The simple answer is bake it in a very hot oven (e.g. ≥500F) until it chars. The carbon in the charred Bakelite conducts.Warning: the charing process will generate smoke, which will both trigger your smoke alarm and make breathing very difficult! Please don't try this.
insulator.
It is an insulator
insulator
Bakelite is a thermosetting plastic, meaning it cannot be reshaped once molded, while polythene is a thermoplastic that can be melted and reshaped multiple times. Bakelite is a poor conductor of electricity, whereas polythene is an insulator. Bakelite is more rigid and heat resistant compared to polythene.
is a pen a insulator of conductor
is water conductor or insulator
is water conductor or insulator