The PT's (VT's) primary is connected between any two line conductors (or line to neutral). It's secondary is connected directly to the burden (e.g. voltmeter). If used together with a CT for the purpose of measuring power or energy, then its polarity markings must be observed.
Yes, we can connect Transformers in parallel. For this operation we should know the polarity of the transformers. If we connect transformers in parallel the total output current is equal to the sum of the 2 transformers secondary current.
Any power transformers can be connected in parallel subject to few conditions:
1. Voltage has to be same
2. Phase angle has to be same.
3. %Z has to be same.
4. Another limiting factor is over all fault level. Fault level goes up when you keep adding the the transformer in parallel.
yes , the sine waves must be the the same for ac otherwise it's like a full short ... combining the dc is the best option coz there is already diods in that protect back flow of power.
Providing the requirements for paralleling transformers are taken into account, they they will share the load they supply.
The rubbing generates Static Electricity charges, and since the positive and negative attract each other, the two balloons stick together.
Both screws and bolts use threads to create a spiral wedge, a simple machine. Screws have pointed ends designed to dig into materials and hold them together. A bolt requires a nut at the other end and pulls the two together to connect them.
To produce the brightest possible light, bulbs should be arranged in parallel to each other. For this purpose, 1. Connect one of the terminals of first bulb with any of the terminals of the other bulb. Let us name this joint as 1 2. Now, connecting the remaining terminal of both of the bulbs together. Let us name this joint as 2 3. now, connect one terminal of the power source with joint 1 and other terminal with joint 2 to get maximum brightness.
When we rub two objects together then heat energy is generated.
When we rub two objects together then heat energy is generated.
no there is no possible way to. but you can connect two game boy colors or two gamboy advances.
No.
Yes it is possible to connect two computers together
Is it possible to connect two excel workbooks connect data from one to another?
Yes, Stevie Ray Vaughn used to run two Fender amps hooked together.
You cannot connect transformers of different voltage in parallel. This is because circulating currents will be set up between the two transformers that may exceed their rated currents.
Neon tube transformers are sized by the length of the tube. These types of transformers operate at voltages from 5,000 to 20,000 volts. If the length of the two tube sections are within the range of the transformers then two tubes can be connected together.
An HDMI cable is not designed to connect two computers together.
Simplest way is to connect with a cross cable
it is possible to .connect two led in reverse polarity. and then one end connect with a 100k resistance then it can connect directly to230 volts
gateway
It isn't a good idea to connect transformers in parallel unless they are identical transformers. If they are not exactly the same model there is a danger of high circulating currents, which could cause them to overheat.