No.
When a bullet penetrates a target, the bullet's kinetic energy will decrease as it transfers some of its energy to the target. The bullet loses energy as it does work to penetrate the target. Some of the energy is also converted to heat due to friction and deformation of the target material.
A "dud" is a term used to describe a bullet that impacts a target but fails to have any effect, typically due to a malfunction or issue with the round's firing mechanism.
Go see your teacher if you don't get your physics homework.
Bullet trajectory is the path the bullet travels once it leaves the barrel. Bullets travel on a long arch and cross the line of sight twice. Once shortly after leaving the barrel and once again on target assuming the sights are properly zeroed. This is the trajectory of the bullet. Bullet velocity is the speed at which the bullet is traveling along it's trajectory.
The bullet will drop due to gravity as it travels, causing it to miss the target. Using the kinematic equation (s = ut + \frac{1}{2}at^2) where (s = 100 m), (u = 200 ms^{-1}), and (a = -9.81 ms^{-2}) (acceleration due to gravity), you can calculate the time it takes for the bullet to reach the target. Once you have the time, you can use the equation (d = \frac{1}{2}at^2) to determine how much the bullet will drop vertically and hence how much it will miss the target.
I
Whiz is the base word of whizzed.
When a bullet penetrates a target, the bullet's kinetic energy will decrease as it transfers some of its energy to the target. The bullet loses energy as it does work to penetrate the target. Some of the energy is also converted to heat due to friction and deformation of the target material.
Bullet and a target by citizen cope
There is a Reaction, called recall or kick. That should read "recoil."
Shooters aim slightly above the target to compensate for the downward trajectory of the bullet due to gravity. This technique is known as adjusting for bullet drop and ensures that the bullet will hit the target accurately at longer distances.
The ball whizzed right past my head, and went through the window.
If you fire a .45 caliber bullet at a paper target, it will leave a .45 inch hole.
Absolutely not, if you try then the bullet will not go to desired target
Sorry, but the limitations of answers.com do not allow us to sketch anything.
A "dud" is a term used to describe a bullet that impacts a target but fails to have any effect, typically due to a malfunction or issue with the round's firing mechanism.
The grains of a bullet, be it black powder or not , is the weight of the bullet. Lets say you have a .50 caliber rifle, and fire a 250 grain bullet at a target and hit dead center. Then fire a 300 grain bullet, that bullet will hit slightly lower on the target , but will have more force or stopping power" due to the weight. So the higher the grain the heaver the bullet.