0
What else can I help you with?
If an electric train is travelling 80 km an hour north and the wind is blowing 40 km east what way is the steam going to travell?
If the wind wasn't blowing and the train was moving it would blow south. If the train was stopped and the wind was blowing east the steam would be blowing east. Because the train is moving and the wind is blowing it would be moving both to the south and the east. diferent answer by another person me... An electric train does not have steam!!!!!!!
What is k factor in energy meter?
The K Factor in Current Transformer Metering is the Multiplyer. The current transformers might be a winding ratio of 200/5 therefore the K Factor would be 40. Meaning for every 100Amps in the meterered conductors only 2.5A is read by the meter the resultant reading is then multiplied by 40 to give the reading of 100A (or the calculated kWh reading for electricity consumption)
What is the conversion factor from electron volts to kelvin?
The conversion factor from electron volts (eV) to kelvin (K) is approximately 11,604.5 eV per Kelvin.
What is the conversion factor from kelvin to electron volt?
The conversion factor from kelvin to electron volt is approximately 8.617 x 10-5 eV/K.
How do you calculate the steam flow rate?
The steam flow rate can be calculated by dividing the mass flow rate of the steam by the specific volume of the steam at the given conditions. This can be determined using steam tables or steam property calculators. The formula to calculate steam flow rate is: Flow rate (lb/h) = Mass flow rate (lb/h) / Specific volume (ft^3/lb)
What is mean by Blowing factor in steam blowing?
Disturbance Or Correction or K Factor in steam blowing in Power Plants is the ratio of Drag created during steam blowing to the drag occurring during Maximum Continuous Rating. Equation of disturbance factor K is shown as below: K=ΔP1/ΔP2 ΔP1=PD1－PS1；ΔP2=PD2－PS2 ΔP1:Difference pressure of steam drum and corresponding super heater during steam blowing-out. ΔP2: Difference pressure of steam drum and corresponding super heater in normal operation of boiler
What is Disturbance factor in steam blowing?
The disturbance factor in steam blowing is a parameter that says how effective is the steam blowing regarding the pipinginternal surface cleaning process. It is the ratio between density*speed^2 in blowing and normal operation conditions conditions. rudi
If a steam train is going east which direction is the smoke blowing?
there is no smoke its a steam train
If an electric train is travelling 80 km an hour north and the wind is blowing 40 km east what way is the steam going to travell?
If the wind wasn't blowing and the train was moving it would blow south. If the train was stopped and the wind was blowing east the steam would be blowing east. Because the train is moving and the wind is blowing it would be moving both to the south and the east. diferent answer by another person me... An electric train does not have steam!!!!!!!
Why is your car blowing steam out of your vents?
The heater core is leaking coolant.
What do you do when you are in the ship when the pipes are blowing steam on SOS island?
avoid the pipes that shoot steam it will happen in the third and fifth rescue.
What is the duration of The K Factor?
The duration of The K Factor is 300.0 seconds.
What episodes do Lauren and Carter kiss?
Episode 3 Blowing Off Steam
When was The K Factor created?
The K Factor was created on 2010-02-06.
When did The K Factor end?
The K Factor ended on 2010-03-20.
What factor is 310 in?
It is a factor in all numbers of the form 310*k where k is an integer.
B If 5 is a factor of k and k is even then 10 divides k?
YES.If k is even then 2 is a factor of k.If 5 is also a factor of k then 2 x 5 = 10 is another factor of k.NOTE : The product of two or more prime factors of a number produces another factor.
