0
What else can I help you with?
If someone receives a shock or apiece of equipment is throwing sparks or arcing you should try to pull them away from the source of electricity?
No, in such situations, you should not touch the person or equipment directly as you could also get shocked. Instead, power off the equipment if possible or use a non-conductive object to separate the person from the electrical source. Call for help and seek medical attention immediately.
WHAT must a Close in Weapon System maintenance person stand on when working on the energized equipment?
When working on energized equipment, a Close-In Weapon System (CIWS) maintenance person must stand on a non-conductive surface to prevent electrical shock. This could include rubber mats or insulating platforms to ensure safety while performing maintenance tasks.
Who is the person who grinds the lens?
An optician or a lens grinder is the person who grinds the lens to the correct prescription as specified by an optometrist or ophthalmologist. They use specialized equipment to shape and polish the lens to ensure it provides the necessary vision correction.
How much weight is needed to stay under water?
The amount of weight needed to stay underwater depends on various factors, including the person's body composition, dive depth, and equipment used. A typical weight for scuba diving is around 10% of a person's body weight, but it is important to conduct a buoyancy check before diving to ensure proper weighting for neutral buoyancy.
How can you measure reflex speed?
Reflex speed can be measured by using specialized equipment that records the time it takes for a person to react to a stimulus, such as tapping a button in response to a visual or auditory cue. This reaction time can be recorded in milliseconds and used to assess a person's reflex speed.
What are the approved procedures for using safety equipment?
Approved procedures for use of any equipment, safety or otherwise, differ from workplace to workplace and are also different for different kinds of equipment. You must learn the procedures of you specific location and equipment by reading instructions, attending a training class, or receiving instruction from your supervisor or another designated person.
What is the rule for equipment with a lockout tag attached?
A lockout tag should only be removed by the person who attached the tag in the first place. Anyone removing the tag could actually cause injury or death to an electrical/engineer working on machinery, an electrician/engineer believing that all is safely switched off. I would sack any person who decided to remove a lockout tag without authorisation.
What happens when equipment is purchased for cash?
The person that had equipment now has cash and the person that had cash now has equipment.
Who is responsible to ensure that safety procedures are followed when conducting an experiment?
When conducting an experiment in a laboratory environment, the person conducting the experiment and the Instructor or Principle Investigator are responsible for ensuring that appropriate safety procedures are followed.
What is it called when a person uses scientific procedures to identify a deceased person?
Archaeology
Where can a person buy survey equipment?
A person can buy survey equipment from eBay. One can buy such equipment from any office store such as Office Depot and Staples. One can get land surveying equipment from Engineer Supply.
Why it is important to follow manufacturers instructions and organisational procedures when dealing with equipment faults?
It is important that when dealing with a problem that you take the correct action and fix the problem as quickly and safely as possible. If you follow the manufacturer's instructions then this will show you the best way to solve a problem and when the problem should be dealt with by a technician. If you do not follow these then you could cause more harm than good and further damage the equipment. If you have been found to do this then it might invalidate your warranty and you will have to pay for a replacement. Organisational procedures are there to protect the health and safety of all workers and make sure that problems are dealt with by the appropriate person. If you do not follow these then you could hurt yourself or others and get into trouble at work. Both these procedures are put in place to keep you safe and to solve problems quickly and effectively.
How could I find a used seat cane with 3 legs?
Craig's List is an excellent source of used equipment of that sort. Make sure you see the equipment before agreeing to a price. Never wire money by Western Union. Contact the seller, arrange to see the equipment in person and proceed from there.
Equipment of a silly person?
rabbit's habit
What do you call a person used to clear away room service equipment?
The equipment is usually cleared away by the person doing the room service work.
How do you keep equipment steralie throughout treatment?
The first step is always to wash hands using the 6-step method, before touching any equipment. Also maintaining a sterile field so that the sterile equipment are only handled by a person dressed in sterile attire and those that get contaminated are discarded
What do you call a person who sells medical equipment?
Medical sales professional. Medical equipment salesperson.
