0
The torque depends on a few things lubrication, grade(strength), the nut inside diameter, and thread pitch. The grade can be found on the nut generally ranging from 4.8-12.9.
Assuming the inside diameter of the nut is close to 12mm, below shows the torque value corresponding to its grade non lubricated.
Metric; US customary units
4.8 = 50Nm; 37Ft lbs
8.8 or 9.8 = 95Nm; 70Lbs
12.9 = 165Nm; 120Ft lbs
What else can I help you with?
Why it is easier to turn a nut if spanner have large handle?
A larger handle provides more leverage, making it easier to apply force and turn the nut. This leverage increases the torque applied to the nut, requiring less effort from the person turning the wrench.
What is the action of a torque spanner?
A torque spanner attempts to infer the tension forces applied to a bolt, by measuring the turning force applied to the nut. This method suffers from uncertainties in the friction between the nut and the bolt, and again from the nut and the surface. It is necessarily an indirect measurement. It is vital that all surfaces be very clean and smooth for this method to be reliable. Compressible washers are a more reliable device, but less simple. Sometimes of a cone or a wave form.
Why is it easy tight a nut using a spanner of long arm than of a short arm spanner?
A long-arm spanner provides greater leverage, making it easier to apply more force to the nut with less effort. This increased leverage allows the user to generate more torque, which makes it easier to tighten the nut effectively. Conversely, a short-arm spanner provides less leverage, requiring more effort to generate the same amount of torque.
Is the rotating or turning Force applied to an object such as a bolt or nut?
The rotating or turning force applied to an object like a bolt or nut is called torque. Torque is a measure of the turning force that can cause an object to rotate around an axis, and it is typically calculated by multiplying the force applied by the distance from the axis of rotation.
How do you set torque wrench at 62lbs?
To set a torque wrench at 62 lbs, first make sure it is at zero. Then, turn the handle or knob on the torque wrench until the indicator lines up with the 62 lb mark on the scale. Once set, tighten the nut or bolt to reach the desired torque value.
What Is Wheel Nut Torque For 2005 Impala?
wheel nut torque 2005 impala
Axel nut torque 2005 Malibu?
The 2005 Chevrolet Malibu axle nut torque specification is 60 pounds. Over torque in the axle nut will cause the will bearing to fail.
Nut torque on pinion nut 2007 dodge 1500?
Torque specs on a 2007 ram pinion
Saab 9.5 lug nut torque?
Lug Nut (Bolt) Torque 110nm (80 ft-lbs)
What is the torque specification for the front axle nut on a Windstar?
Axle nut torque specs are 170-203 ft.lbs
What is the spindle nut torque on a 1990 Ford Escort GT?
axle nut torque on a 1995 ford aspire
What is the lug nut torque for a 1997 gmc z71 1500?
Lug nut torque 1997 gmc k1500
What is the lug nut torque for 2003 Subaru Forester?
Wheel nut torque is listed as 90Nm for the entire Forester range
What is the lug nut torque for a 1993 Volvo 960?
The lug nut torque for that 1993 Volvo 960 is 63 ft.lbs.
Ford Focus front hub nut torque?
If this is the European Ford Focus Front hub nut torque is 300-332Nm.
What is the rear differential pinion nut torque specs?
What is the torque specs on a 2001 ford truck rear end pinion nut..
What is the wheel nut torque for Caterpillar 777 truck?
What is the wheel nut torque spec for 777 g
