answersLogoWhite

0

Crushed gravel with sand not screened out weighs approximately 120 lbs. per cubic foot. See: <simetric.co.uk> for more information.

User Avatar

Wiki User

16y ago

What else can I help you with?

Continue Learning about Physics

How much does 1 yard of crusher run weight?

On average, 1 cubic yard of crusher run gravel weighs about 2,700 pounds (1.35 tons). However, the weight can vary depending on the specific type of material and its compaction.


Weight of 1cubic meter of gravel?

The weight of 1 cubic meter of gravel varies depending on the type of gravel. On average, it can weigh between 1,500 to 3,000 kilograms or 1.5 to 3 tons.


How much is one ton of gravel?

do you mean cubic yards? depends upon the rock type and how fine it is, but one reference notes that one cubic foot of gravel typically weighs about 100 pounds. So 1 ton has 2000/100 or 20 cubic feet of gravel. A cubic yard is 3x3x3 = 27 cubic feet to the cubic yard Answer is 20/27 or 0.74 cu yard. I'd round that to 3/4 cubic yard. Other factors that affects the volume of gravel is the moisture content and the grading of the material. Pea gravel for instance contains all particles of a specified size, say, 1/4 inch. With most particles being the same size, the air voids in the bulk material are maximized, therefore one ton of pea graves has more volume than one ton of random size material. If you have gravel of 1/4 inch maximum size along with all sizes smaller than 1/4 inch, the air voids in the bulk material are very small because the smaller particles fill the spaces between larger particles. One ton of random size material will occupy less volume. The other factor, moisture, causes the volume of one ton of loose placed material to increase. Therefore, one cubic yard of moist gravel will weigh less than one cubic yard of dry gravel. This trait is reverse what seems logical because of the added weight of the water. What actually occurs is the moist surfaces of the gravel particles causes them to stick together in random patterns (resulting in larger air voids) rather than sliding tightly together. The increased air in moist gravel more than offsets the increased weight of water so one cubic yard of moist loose (not compacted) gravel weighs less than one cubic yard of dry gravel. Almost all gravel sales are by weight (ton) rather than by volume because of this factor.


How much does a cubic yard of pit run gravel weigh?

It depends on the size of your gravel (the amount of air trapped between the rocks). If you have small gravel (decomposed granite) it'll weigh more - if you have larger rocks, (river rocks, etc) it'll weigh less. It usually ranges from 1.3, 1.4 to 1.8, 1.9 tons.


How many pounds in 0.5 cubic feet of pea gravel?

It is not possible to accurately determine the weight of pea gravel in a cubic foot without knowing the specific gravity of the gravel. However, a common estimate is that pea gravel weighs about 1.4 tons per cubic yard. This would equate to roughly 84 pounds in 0.5 cubic feet.

Related Questions

What is 1 yard of gravel?

A yard of gravel is the amount of gravel that will fill a container whose inside dimension is 1 yard by 1 yard by 1 yard. It's a cubic yard of gravel. The metric equivalent is .9144 meters by .9144 meters by .9144 meters.


What is the weight of 1 yard of pea gravel?

One yard of PEA Gravel weighs approximately 3,000 pounds Clarification: one CUBIC yard weighs approx 3,000 pounds.


How many pounds in 1 yard of gravel?

The weight of gravel can vary depending on its type and moisture content, but on average, 1 cubic yard of gravel weighs approximately 2,500 to 3,000 pounds. This means that 1 yard of gravel typically weighs around 2,700 pounds. For more precise measurements, it’s best to check the specific type of gravel being used.


What is the weight of 1 yard of crushed gravel?

Crushed? 3,000 pounds or more depending on how finely crushed it is.


How much does 1 yard of crusher run weight?

On average, 1 cubic yard of crusher run gravel weighs about 2,700 pounds (1.35 tons). However, the weight can vary depending on the specific type of material and its compaction.


How much does 1 cubic yard of pea gravel weigh?

1 cubic yard = 1.3 tons


How many tons of gravel in a yard.?

1


What does 1 cubic yard of road gravel weight?

About 2,700 pounds. Actually weight can vary up or down depending on how finely the stone is crushed, water content and the type of stone.


How many tons of gravel is needed to build a road 12 ft wide 6 inches deep and 1000 feet long?

(2222/9) times (the weight of 1 cubic yard of gravel, in tons)


How much does 1 cubic yard of gravel weigh?

This depends on the size of gravel, the water content of the gravel, and the material composition of the rock used to make the gravel. Typically 1 cu.yd. of gravel wieghs 3000 lb.


How may bags of pee gravel equal 1 yard?

14 .


How much does 1 cubic yard of pea gravel cost?

$8.00