The conversion factor from cubic feet per minute (cfm) to kilograms per second (kg/s) for air is approximately 0.0004718.
The conversion factor for cubic feet per second to another unit of measurement depends on the specific unit being converted to. For example, to convert cubic feet per second to gallons per minute, the conversion factor is 448.831.
To convert from kilograms per meter per second (kg/ms) to nanoseconds per square meter (ns/m2), the conversion factor is 1 kg/ms 1,000,000,000 ns/m2.
The conversion factor is 35.31 so, m3/sec x 35.31 = feet3/sec:13.351 m3/sec x 35.31 = about 471.49 cubic feet per second.
To convert gallons per minute (gpm) to liters per second (L/s), you can use the conversion factor 1 gpm = 0.06309 L/s. So, 22.5 gpm is approximately 1.42 L/s.
After a second comes a minute, followed by an hour.
The conversion factor for cubic feet per second to another unit of measurement depends on the specific unit being converted to. For example, to convert cubic feet per second to gallons per minute, the conversion factor is 448.831.
To convert from kilograms per meter per second (kg/ms) to nanoseconds per square meter (ns/m2), the conversion factor is 1 kg/ms 1,000,000,000 ns/m2.
1 foot = 0.3048 meter 1 minute = 60 seconds60 feet/minute x 1 minute/60seconds x 0.3048 meter/foot= 0.3048 meter/secondyou may try using the online converter linked below next time.
Conversion: cm per second x 1.969 = feet per minute
Use this conversion: km per second x 60,000,000 = millimeters per minute.
Conversion: feet per minute x 0.000003157 = miles per second
To convert liters per minute to milliliters per minute Multiply Liters by 1000 To convert now Milliliters per minute to Milliliters per second divide by 60 Thus if we have V liters per minute, that would translate to (1000 x V)/60 milliliters per second. So the conversion factor is 1000/60 or 100/6 or 50/3
One second of latitude equals 100.39 feet . . .here is the proof:one degree = 60 Nautical Miles or 69 Statute miles; (conversion factor 69/60 = 1.15)one minute minute = 1 Nautical Mileone second = 1 Nautical Mile / by 60 seconds = 0.01666 of a Nautical Mileuse conversion factor of 1.15 x 0.01666 = 0.019159 x a Statute Mile -->equals (5420 ft X 0.019159) = 100.39 feet per second of latitudeRead more: How_much_distance_on_the_earth's_surface_does_one_second_of_latitude_equals
you need to know the density of the material that is flowing. 1 liter per minute of water times 999 kg/cu. meter equals .017 kg/s water.
There are 6 x 10^76 yoctoseconds in a minute. To calculate this, we start with the conversion factor that 1 minute is equal to 60 seconds. Next, we convert seconds to yoctoseconds using the conversion factor that 1 second is equal to 1 x 10^24 yoctoseconds. Multiplying these two conversion factors gives us the final answer of 6 x 10^76 yoctoseconds in a minute.
Conversion: cm cubed per minute x 1.67 × 10^-8 = cubic meters per second.
To convert knots to inches per second, use the conversion factor of 1 knot = 1.68781 inches per second. Multiply the speed in knots by this conversion factor to get the equivalent speed in inches per second.