The volume of the container is 5 cubic meters.
It is difficult to provide an exact answer without knowing the dimensions of the teak wood being loaded in the container. However, a standard 40 ft container can typically hold around 67 cubic meters of cargo.
That would be its 'capacity'.
The volume of water a pipe can hold can be calculated using the formula for the volume of a cylinder: V = πr^2h, where r is the radius and h is the height (or length) of the cylinder. In this case, the radius is half of the diameter, so r = 30/2 = 15 meters. Assuming the pipe is 1 meter long, the volume of water the pipe can hold is: V = π(15)^2(1) ≈ 706.86 cubic meters.
A 35,200 cubic foot container can hold up to 263,314.29 gallons.
You are asking for volume which is found by simply multiplying the three numbers together: 30*86*24=61920 cubic inches or, converted to cubic feet: 35.8333 cubic feet
The amount a container holds is its capacity, measured in liters, gallons, or cubic meters.
To give you an idea, a container with a volume of 180 cubic meters could hold up to about 47,550 gallons of water; more than most residential swimming pools.
volume
The measure of how much a container can hold is referred to as its capacity. This is typically expressed in units such as liters, gallons, or cubic meters, depending on the context. Capacity indicates the maximum volume of substances, such as liquids or solids, that the container can accommodate without overflowing.
Any container having a volume of 7,620 cubic feet.
Assuming that the 512 cubic centimetres refers to the inside measure then the answer is 512 cubic centimetres, of course! Otherwise the answer depends on the thickness of the container.
A cubic container has a volume of 1cm^3 and can hold 1 ml of water which has a mass of 1.AnswerMass is measured in kilograms. The mass of a given cubic container depends on the material contained within.
Figure the volume in cubic inches and divide by 277.4 to get the number of gallons the container will hold. This is A close approximate formular. Convert the gallons to pints or less if it is a small container.
Well, as an example, a 70-cubic meter container could hold up to about 18,500 gallons of water.
One cubic foot is a measure of volume. A one cubic meter container could hold up about 264 gallons of water.
A standard 40-foot shipping container has a volume of approximately 67.7 cubic meters (cbm). This volume can vary slightly depending on the specific design and manufacturer of the container, but it typically falls within this range. Therefore, you can generally consider a 40-foot container to hold about 67.7 cbm of cargo.
Well, darling, a 20-foot container can hold around 33 cubic meters of cargo. Since one cubic meter is equal to 1000 liters, that means you can fit approximately 33,000 liters in that bad boy. Just make sure you're not trying to ship anything that'll spill or you'll have a mess bigger than my attitude.