answersLogoWhite

0

A fuse is a device that contain a thin strip of metal that will melt if there is too much current through it.

A circuit breaker is a reusable safety switch that breaks the circuit when the current gets too high.

They are used to prevent circuits from overheating.

User Avatar

Wiki User

13y ago

What else can I help you with?

Continue Learning about Physics

How are fuses and circuit breakers the same?

A fuse breaks a circuit if the load on it is greater that what it is rated for and it burns out then has to be replaced, but only after the cause of the overload has been found and repaired first. A circuit braker on the other hand, does in fact work the same way as a fuse does, but it works more like a switch that cuts off if the electric current going through is greater than what the breaker is rated for. Unless there is something mechanically wrong with it, or it burns out, it does not have to be replaced, but will continue to kick out or, "brake" the circuit until what ever is causing the overload is fixed. Fuses and breakers comes in all sizes and shapes and may not be recognized, times for what they are.


What devices are used to protect people from an electric current?

Electrical devices such as circuit breakers, fuses, and ground fault circuit interrupters (GFCIs) are commonly used to protect people from electric currents. Additionally, electrical insulation, such as rubber gloves and mats, can prevent electric shocks in specific situations.


What does a motor do to help the circuit from working?

A motor converts electrical energy into mechanical energy to perform a specific task, such as spinning a fan or moving machinery. It can draw a significant amount of current, which may affect other components in the circuit if it is not properly sized or protected. Adding safeguards like fuses or circuit breakers can help prevent damage to the circuit caused by the motor.


What is meant by the term load centre?

A load center, or distribution board, is a panel that distributes electrical power in a building. It typically contains circuit breakers or fuses to protect circuits from overloading. The load center is where the main power feed enters a building and branches out to various circuits.


What safety precautions should be taken to prevent arcing and sparking in electrical systems?

To prevent arcing and sparking in electrical systems, safety precautions include proper insulation of wires, regular maintenance of equipment, grounding of electrical systems, using appropriate circuit protection devices like fuses and circuit breakers, and following safety guidelines when working with electricity.

Related Questions

What are the circuitrotectors?

Circuit protectors are fuses and circuit breakers.


Which of these are alternatives to fuses?

circuit breakers


Does a 1977 Harley fl have fuses?

No fuses, but it does have circuit breakers.


When did circuit breakers replace fuses in homes?

Circuit breakers started replacing fuses in homes in the 1960s and 1970s as a safer alternative for protecting electrical circuits. Circuit breakers are more convenient as they can be reset, whereas fuses need to be replaced when they blow.


Are easier to use than?

circuit breakers ...fuses


Circuit breakers are used for the same purposes as?

fuses


What has replaced fuses in the main fuse box in a house?

Circuit breakers have replaced fuses in many modern homes. Circuit breakers offer better protection against overloads and short circuits, and they can be reset rather than needing to be replaced like fuses.


What fuses and circuit breakers provide protection in the event of?

Short circuit fault.


How do fuses or circuit breakers help protect homes?

During an electrical fault, be it a short circuit or circuit overload, fuses and breakers are designed to open at a specific amperage. This opening of either device eliminates a fire hazard before it gets a chance to start. This is how fuses and breakers protect the home.


Is there any alternative for fuse in house wiring system?

Yes, circuit breakers are a popular alternative to fuses in house wiring systems. Circuit breakers are reusable and can be reset after they trip, unlike fuses which need to be replaced. circuit breakers can help protect against overload and short circuits in the electrical system.


Is a circuit breaker an alternative fuses?

Circuit breakers do the same thing as fuses. They interrupt current flow when a certain preset point is reached. The difference between circuit breakers and fuses are that circuit breakers are resettable and reusable, whereas fuses are one time devices that must be replaced after they blow.


What are the main protective devices in a power system?

Circuit Breakers or fuses.