0
What are one of the processes that could be use to separate a mixture of iron filings wood shavings and salt?
Hi, A magnet will remove the iron filings, if you put the magnet inside a plastic bag first you can peel the bag off the magnet leaving the iron filings inside the bag - much easier than trying to scrape them off the magnet later. Adding water to the remaining salt / wood mixture and shaking or stirring will dissolve the salt. The wood shaveings can then be filtered off and washed to get rid of any remaining salt soloution. Finally the water can be evaporated from the salt solution to get the salt back. Hope this helps, Mike.
What else can I help you with?
Is the mixture of iron filings homogeneous or heterogeneous?
A mixture of iron filings is homogeneous, meaning it has a uniform composition throughout. This is because iron filings are small particles that mix evenly with each other, leading to a consistent appearance and properties in the mixture.
What will you observed when A magnet is rolled in a mixture of iron filling and sulfur powder?
The iron filings will be attracted to the magnet and stick to it due to their magnetic properties. The sulfur powder will remain unaffected as it is not magnetic. You will observe the separation of the iron filings from the sulfur powder as the magnet is rolled through the mixture.
Are oil and vinegar a mechanical mixture?
No, oil and vinegar are not a mechanical mixture. They form a heterogeneous mixture where the two liquids do not fully mix or dissolve into each other, creating separate layers.
Name two processes that are used to seperate mixtures?
Filtration separates mixtures by passing them through a barrier, allowing only certain components to pass through. Distillation separates mixtures by exploiting differences in boiling points to vaporize and then condense components.
How will you separate sand?
You can separate sand from other materials by using methods like sieving, sedimentation, and filtration. Sieving involves passing a mixture through a mesh or sieve to separate particles based on size. Sedimentation involves letting the sand settle to the bottom of a container of water, allowing you to pour off the water and collect the sand. Filtration uses a filter paper or mesh to separate the sand from a liquid mixture.
How do you separate wood shaving and iron filing?
You can use a magnet to separate iron filings from wood shavings. Simply pass the magnet over the mixture and the iron filings will be attracted to the magnet, leaving the wood shavings behind. You can then easily separate the two components.
How do you separate a mixture or pepper and iron shavings?
Use a magnet to remove the iron shavings.
How do you separate a mixture of sodium chloride and aluminium filings?
To separate a mixture of sodium chloride and aluminum filings, you can use a magnet to separate the aluminum filings since they are magnetic, while the sodium chloride will remain unaffected. Alternatively, you can dissolve the mixture in water, then filter it to separate the insoluble aluminum filings from the soluble sodium chloride solution.
What physical properties would you use to separate a mixture of soil and iron filings?
A magnet can be used to separate iron filings from soil due to the magnetic properties of iron. Simply pass the magnet over the mixture to attract and separate the iron filings from the soil.
What liquid can be used to separate mixture of iron filings and sulfur?
Carbon disulfide can be used to separate a mixture of iron filings and sulfur. This is because carbon disulfide can be used to dissolve sulfur, thus leaving you with the iron filings.
How you could separate a mixture of iron shavings and sand?
use a magnet
How will you separate a mixture of iron filings sand and camphor?
To separate a mixture of iron filings, sand, and camphor, you can use a magnet to attract the iron filings, leaving the sand and camphor behind. Then, you can dissolve the camphor in water as it is soluble, allowing the sand to settle at the bottom. Finally, you can filter out the sand to obtain separate components.
How do you separate mixture of iron filings water and clay?
evaporate the watercrush the clay-iron mixture to powderuse a magnet to remove the iron from the clay
How when cold do you separate a mixture of iron filings and sand?
This can be done by the processs of magnetism. Holding amagent near the mixture will cause the iron filings to be attracted out of the sand.
How do you seperate a mixture of iron filling and sawdust?
One way to separate a mixture of iron filings and sawdust is to use a magnet. The iron filings will be attracted to the magnet and can be easily separated from the sawdust. Alternatively, you can also use a sieve to separate the iron filings from the sawdust based on size difference.
How do you explain the process of separating a mixture consisting of iron filings and sand in a plastic bowl?
Here's the full scientific report I had to do in year 7. Title: Magnetic Separation Aim: To separate iron filings from sand using a magnet. Equipment: Magnet, sand and iron filing mixture, plastic bowl Method: 1. Pour the mixture into the plastic bowl 2. Move the magnet slowly through the mixture Results: When the magnet was moved through the mixture, it picked up the iron filings but not the sand. Conclusion: In this experiment we demonstrated that a magnet can pick up iron filings in a sand and iron filing mixture through magnetism. The aim was achieved as we were able to separate the iron filings from the sand.
How do you separate iron and copper filings?
One way to separate iron and copper filings is by using a magnet. Since iron is magnetic, you can use a magnet to attract and separate the iron filings from the copper filings, which are not magnetic. Alternatively, you can dissolve the mixture in a solvent, filter out the copper filings, and then evaporate the solvent to retrieve the iron filings.
