0
What else can I help you with?
How does condenser size affect the seer?
The size of a condenser doesn't directly affect the SEER rating. SEER (Seasonal Energy Efficiency Ratio) is a measure of the efficiency of an air conditioning system. The higher the SEER rating, the more efficient the system is at cooling. The size of the condenser will impact how well the system can cool a space efficiently, but it is not the sole factor in determining the SEER rating.
How many tons is lennox hs-19311v-4p?
The Lennox HS-19311V-4P is a 1.5-ton, 13 SEER, 3-phase commercial split-system air conditioner.
How do you calculate the magnitude of a vector?
To calculate the magnitude of a vector, you can use the Pythagorean theorem in multiple dimensions. In two dimensions, the magnitude is the square root of the sum of the squares of the vector components. In three dimensions, add the squares of the components and then take the square root.
How many watts does a 3 ton air conditioner use?
It depends on the efficiency of the air conditioner. I have two 3-ton units for my home. One recently died and I replaced it with a more efficient unit. The new unit is 16 SEER, while the old was 12 SEER. In general, the higher the SEER rating, the more efficient, but you get diminishing returns as you go higher. For example going from 12 to 13 saves a lot more energy than going from 15 to 16. I have a whole house watt meter connected and measured both units after the upgrade to see how much more efficient my new one was. Below are the results. As you can see there is no easy answer to how much your unit consumes. 16 SEER - 2300 watts 12 SEER - 3400 watts
What is tolerance in laser beam machining?
Tolerance in laser beam machining refers to the allowable deviation from the desired dimensions in the final workpiece. It is the acceptable range within which the dimensions of the machined part can vary without compromising its functionality or quality. Tight tolerance requirements in laser beam machining indicate the need for high precision and accuracy in achieving the desired part dimensions.
16 seer coil with 13 seer condenser?
The seer doesn't matter if it will function or not it will. Just keep in mind that you will only get 13 seer max out of system
Can you use a 13 seer compressor on a 10 seer a coil?
Yes, but you will not get 13 SEER. Whether or not it will satisfactorily cool your home properly is a crap shoot due to the system being mismatched. But you can do it and it may work. Not understanding why you would do this as the indoor coil is the least expensive component in a CAC system.
Can replacing a 10 seer heat pump with a 13 seer hp affect the air handler that's 10 seer?
I have been told that if you are going to replace a 10 seer with a 13 seer, you have to change the coil on the inside unit to work with a 13 seer heap pump. In order to gain the extra energy efficiency yes you would need to replace the air handler as well.
Can you use a 13 seer coil evaporator with a 10 seer condensor?
No,The differences are to great.You will end up with more problems than you want.10 seer condensor cant keep up with 13 seer evap.Suction pressure would be to much,and you never would acheive cooling temps.
Can you put a 13 seer condenser on a 10 seer evaporator?
Yes you can but you will NOT get the 13 seer rating from the condenser..
Can you use a 13 seer condensor with a 10 seer coil?
it will work but you will not reach the rated seer rating. also you will have oil return problems due to less refrigerant volume (because the newer 13 seer units run a lower head pressure. this problem can be resolved by installing a thermostatic expansion valve (txv) but when it is all said and done just go to 410-a with both units because r-22 is not going to be reproduced after 2010.
What size condenser do you need to match a 5ton 10 seer coil that is at least 9 years old?
A 5 ton 10 SEER condenser will do it, but you can no longer buy a 10 SEER condenser. Replacing the condenser and not matching it with the proper evaporator coil will nullify the SEER value stated on the new unit and your actual SEER and EER will be anyone`s guess so do not pay any attention to it. The coil is the least expensive component of the 3 and now would be the time to upgrade away from R 22 which is currently being phased out and will become very expensive in the near future. Something to consider if that 9 year old coil were to fail before the new condenser does or if you were to develop a troublesome leak. But if you are dead set against the coil replacement I suppose a 4.5 or 5 ton, depending on the climate where you live will work. Get the lowest SEER currently available (13) since it will mean nothing.
What is the seer of goodman model number gsh130361bb?
13 seer, 3 ton
What is the seer rating for comfort maker air handler fsm2x2400a1?
13 seer
What is the seer rating on a model 13aja42b01 condenser?
your unit should be a 13 seer 3.5ton
What is the tonage and seer on the goodman VSX130361AA Air conditioner?
3 ton 13 seer.
What is the seer rateing for Trane?
13
