0
What are the natural random uncertainties in reading your thermometer and balance?
The uncertainty of a measuring instrument is estimated as plus or minus (±) half the smallest scale division. For a thermometer with a mark at every 1.0°C, the uncertainty is ± 0.5°C. This means that if a student reads a value from this thermometer as 24.0°C, they could give the result as 24.0°C ± 0.5°C
What else can I help you with?
Why is it advised not to hold the thermometer by its bulb while reading it?
Holding the thermometer by its bulb can transfer heat from your hand to the bulb, affecting the temperature reading and providing inaccurate results. It's recommended to hold the thermometer by the stem to prevent any external heat sources from interfering with the measurement.
Why must a laboratory thermometer be left in place to take a reading?
A laboratory thermometer must be left in place to take a reading because the thermometer needs time to adjust and reach thermal equilibrium with the substance being measured. Moving the thermometer too soon can result in an inaccurate reading.
How to use a thermometer accurately when reading the temperature?
To use a thermometer accurately when reading the temperature, first ensure the thermometer is clean and calibrated. Insert the thermometer into the area being measured (e.g., under the tongue, in the ear, or in the armpit) and wait for the reading to stabilize. Be sure to follow the manufacturer's instructions for the specific type of thermometer being used.
Is a thermometer linear?
Yes, a thermometer is linear because the relationship between the temperature being measured and the reading on the thermometer follows a straight line. This means that as the temperature increases or decreases, the reading on the thermometer changes in a consistent and predictable manner.
Does the use of a cold thermometer affect temperature reading?
Yes, using a cold thermometer can affect the temperature reading by causing it to start at a lower baseline. It's important to ensure the thermometer is at room temperature before use to get an accurate reading.
Why is it necessary to warm the thermometer before placing it into the solutions?
The thermometer reading will change from reading the solution temperature.
Is a rectal thermometer reading of 101 degrees equal to an oral thermometer reading of 101degrees?
No, a rectal thermometer reading is typically about 0.5 to 1 degree Fahrenheit higher than an oral thermometer reading. So a rectal thermometer reading of 101 degrees would roughly correspond to an oral thermometer reading of 100-100.5 degrees. It's important to use the same type of thermometer for consistent readings.
Why is it advised not to hold the thermometer by its bulb while reading it?
Holding the thermometer by its bulb can transfer heat from your hand to the bulb, affecting the temperature reading and providing inaccurate results. It's recommended to hold the thermometer by the stem to prevent any external heat sources from interfering with the measurement.
Why must a laboratory thermometer be left in place to take a reading?
A laboratory thermometer must be left in place to take a reading because the thermometer needs time to adjust and reach thermal equilibrium with the substance being measured. Moving the thermometer too soon can result in an inaccurate reading.
How to use a thermometer accurately when reading the temperature?
To use a thermometer accurately when reading the temperature, first ensure the thermometer is clean and calibrated. Insert the thermometer into the area being measured (e.g., under the tongue, in the ear, or in the armpit) and wait for the reading to stabilize. Be sure to follow the manufacturer's instructions for the specific type of thermometer being used.
Is a thermometer linear?
Yes, a thermometer is linear because the relationship between the temperature being measured and the reading on the thermometer follows a straight line. This means that as the temperature increases or decreases, the reading on the thermometer changes in a consistent and predictable manner.
Does the use of a cold thermometer affect temperature reading?
Yes, using a cold thermometer can affect the temperature reading by causing it to start at a lower baseline. It's important to ensure the thermometer is at room temperature before use to get an accurate reading.
Why must you read the temperature without removing the thermometer from the solution?
The thermometer reading will change from reading the solution temperature.
What happen to the thermometer reading when the temperature increase?
When the temperature increases, the mercury inside the thermometer expands due to thermal expansion, causing the level of mercury to rise in the thermometer tube. This results in a higher reading on the scale of the thermometer, indicating a higher temperature.
How would a temperature reading would be different if the thermometer were over unshaded asphalt?
how would a temperature reading be different if the thermometer were over unshaded asphalt
Where do you stick the thermometer?
You should place the thermometer under your tongue for an accurate oral temperature reading.
How long does it really take to get a reading on an instant meat thermometer?
As long as your meat thermometer is calibrated correctly, it should only take about 2-5 seconds to get a reading.
