The six parts of a windmill tower are the base, tower frame, tower cap, wind vane, blades, and rotor. These components work together to support and direct the operation of the windmill to harness wind power for energy production.
The six parts of a wind turbine tower are the foundation, tower sections, nacelle, rotor hub, blades, and the electrical system.
The main parts of a wind turbine are the tower, nacelle, rotor blades, and hub. The tower supports the turbine at the desired height. The nacelle houses the gearbox, generator, and other components. The rotor blades capture wind energy and transmit it to the generator through the hub.
A flour mill typically runs on electricity generated from a power source such as fossil fuels, hydroelectricity, or wind energy. In some cases, a flour mill can be powered by wind energy if it is equipped with a wind turbine to generate electricity.
it makes it by less weight and to ,make sure you put ur wind mill in a place were there is a lot of wind ============================= A windmill doesn't "make wind". The windmill is built in a place where there's plenty of wind. When the wind blows, it makes the windmill turn, and the turning is used to do useful work, like grinding grain, pumping water, or producing electricity.
-mill, -strike... windstorm windup windshield windsock crosswind tailwind windblown windpipe wind chimes woodwind headwind windburn
if you are talking about the hover craft on astroknights it is in the top of the wind mill tower. spin the blades on the wind mill and the top will open up so you can get it
The six parts of a wind turbine tower are the foundation, tower sections, nacelle, rotor hub, blades, and the electrical system.
the moter go figure it out ahghdbkasjdkasjhdkashdkjashdkjashdkjashdkjashdkjsahdkjhadjkhaskjhsajkdhaskjdhasjkdhasjkdhkjsadhjkasdhaksdjksdhsakjhdjkasdhkjashdkjasdhjksadhkjsadhksajdhaskjdhaskjdhasjkdhsakjdhaskjdhaskjdhasjdhaksjdhaskjhdjkashdjkahsdkjashdjkashdkjasdhkasjhdkajshdksajhdksajhdjkasdh
A tower mill is a type of vertical windmill consisting of a brick or stone tower, on which sits a wooden 'cap' or roof, which can rotate to bring the sails into the wind.
The main parts of a wind turbine are the tower, nacelle, rotor blades, and hub. The tower supports the turbine at the desired height. The nacelle houses the gearbox, generator, and other components. The rotor blades capture wind energy and transmit it to the generator through the hub.
they are gears to grinding stone , grinding stone bucket to pour grain
The wind electricity work because of the wind mill, wind mill makes wind energy.
you get on top of the ye old romour mill sign, and jump on the wind mill blades and make the wind mill move. Jump about 4-5 times. Then, jump onto the middle of the windmill, and from that jump on the roof and enter.
A wind mill.
Some times to much wind is entered into the wind mill so the wind mill might not be able to produce much or any energy.
Jump up to the roof inside the mill and pull on the rope, the go outside the mill and jump on the blades to make them spin counter-clockwise.
the purpose of drive shaft is to assist in the generation of electric power in the wind mill