answersLogoWhite

0

These are called bi-metalic coils (two different metals stuck tightly together), which expand and contract at different rates when the temperature changes, thus coiling tighter or looser causing the glass tube filled with Mercury to shift to the right or left to make or break the low voltage (~24volts usually) electrical connection, causing the air conditioner or heater to turn on and turn off when the temperature changes.

User Avatar

Wiki User

16y ago

What else can I help you with?

Continue Learning about Physics

How does a refrigerator is able to maintain a constant cool temperature?

A refrigerator maintains a constant cool temperature by using a compressor to circulate refrigerant through a closed system of coils. The refrigerant absorbs heat from the interior of the fridge and releases it outside. A thermostat controls the compressor to ensure that the temperature inside remains stable.


What is the three basic types of eddy current coils?

The three basic types of eddy current coils are absolute, differential, and bridge coils. Absolute coils measure the absolute impedance or phase angle change of the eddy current probe. Differential coils measure the slope or rate of change of impedance, while bridge coils compare the impedance changes between two coils.


What do the coils outside of a refrigerator do?

The coils outside of a refrigerator release heat from inside the refrigerator to the surrounding air, helping to keep the inside of the refrigerator cool. This process allows the refrigerator to maintain the desired temperature for storing food and other items.


If you leave the refrigerator door open will the room temperature change?

Yes, leaving the refrigerator door open will cause the room temperature to increase. The refrigerator removes heat from its interior and expels it into the room through the coils at the back. When the door is open, the heat from the refrigerator interior will escape into the room, causing a slight increase in temperature.


What are 2 things that can change the strength of an electromagnet?

The number of coils in the wire wrapped around the core and the amount of electric current flowing through the wire can both change the strength of an electromagnet. More coils and higher current will increase the strength of the magnetic field.

Related Questions

How does the thermostat in your house operate?

Traditional thermostats use a sealed glass tube with a bubble of mercury as the low-voltage switch to activate the furnace relay switch. Two wires sealed into the glass are covered or uncoverd by the mercury as it sloshes from side to side in the tube. The tube is moved by a wound bi-metallic strip that coils or uncoils as the temperature changes.


What is the name of a butterfly sipping tube?

The butterfly's sipping tube that coils and uncoils is called a proboscis, verterbrates, and inverterbrates can have these like the elephant. A proboscis is an appendage from the head of an animal. : )


How do you raise front coils?

Change coils.


How does the thermosta on an iron work?

The thermostat on an iron works by turning the power to the heating coils on and off. This regulates the temperature of the iron, keeping it at the desired temperature. Usually, the thermostat is a bi-metallic switch, which moves in response to heat. The knob changes the pressure on the switch, which changes the amount of heat required to turn the switch off.


How do heater coils play a role in the HVAC system's operation?

Heater coils in an HVAC system help to heat the air that is circulated throughout a building. When the thermostat detects a need for heat, the heater coils are activated to warm up the air before it is distributed through the vents. This helps to maintain a comfortable temperature inside the building during colder weather.


Where is the thermostat and is it hard to change located on a Ford Escort LX?

just follow the top radiator hose to the cylinder head under the coils... its right there. 3 nuts holding the housing


Where is temp sending unit on 2004 ford ranger?

The Cylinder Head Temperature (CHT) sensor for the 2.3L engine is located between the two center ignition coils. The Engine Coolant Temperature (ECT) sensor for the 3.0L engine is located in the intake manifold to the right of the thermostat housing. The Engine Coolant Temperature (ECT) sensor for the 4.0L engine is located in the intake manifold behind the thermostat housing.


How does a refrigerator is able to maintain a constant cool temperature?

A refrigerator maintains a constant cool temperature by using a compressor to circulate refrigerant through a closed system of coils. The refrigerant absorbs heat from the interior of the fridge and releases it outside. A thermostat controls the compressor to ensure that the temperature inside remains stable.


What keeps low the temperature in refrigerator?

The temperature in a refrigerator is kept low by a compressor that continuously circulates refrigerant gas through the system. As the refrigerant gas moves through the coils, it absorbs heat from inside the refrigerator, keeping the temperature low. This process is regulated by a thermostat that controls when the compressor turns on and off to maintain the desired temperature.


How can a change in voltage of a transformers primary coil create a change in the secondary coils voltage without the coils touching?

The more coils you have on one side will increase the magnetic force


How can a change in the voltage of a transformer's primary coil create a change in the secondary coils voltage without the coils touching?

The more coils you have on one side will increase the magnetic force


What is the three basic types of eddy current coils?

The three basic types of eddy current coils are absolute, differential, and bridge coils. Absolute coils measure the absolute impedance or phase angle change of the eddy current probe. Differential coils measure the slope or rate of change of impedance, while bridge coils compare the impedance changes between two coils.