0
What else can I help you with?
What is 0.5 psig in inches of water column?
0.5 psig is equivalent to 13.8 inches of water column.
What is 50 psig in psi?
50 psig is equivalent to 64.7 psi. To convert psig to psi, you simply add the atmospheric pressure at sea level, which is about 14.7 psi.
If a 30ft3 volume of air at 10 psig is compressed to 25 ft3 at a constant temperature what would be the new pressure in psig?
Using the ideal gas law equation P1V1 = P2V2, with initial pressure (P1) = 10 psig, initial volume (V1) = 30 ft^3, final volume (V2) = 25 ft^3, we can solve for the final pressure (P2). (10 psig * 30 ft^3) / 25 ft^3 = 12 psig, so the new pressure would be 12 psig.
What is the condensing temp for a head psi of 296 psig for an r22 system?
The condensing temperature for an R22 system with a head pressure of 296 psig would typically be around 120-130°F. This is based on the saturation temperature corresponding to a pressure of 296 psig on the R22 pressure-temperature chart.
What is the evaporation temperature of R-134a at 0 psig?
The evaporation temperature of R-134a at 0 psig (or atmospheric pressure) is around -26.2°C (or -15.16°F).
How do you convert 15 psia to psig?
psia to psig psig - 15 15 - 15= 0 psig
100 psia to psig?
psia=psig+atmospheric pressure where, atmospheric pressure = 14.7psi therefore psig=psia-atmospheric pressure psig=100-14.7 psig=85.3psig
What does 85 psia equals in psig?
70 psig
What term is more commonly use in refrigeration psia or psig?
psig
What is 0.5 psig in inches of water column?
0.5 psig is equivalent to 13.8 inches of water column.
How do you convert 55 psig to absolute pressure?
55 psig +15=70
Can graphite stand pressure and temperature of steam?
Up to about 150 psig or so. Yes. Graphite is used for shaft seals on steam powered equipment.
What is 50 psig in psi?
50 psig is equivalent to 64.7 psi. To convert psig to psi, you simply add the atmospheric pressure at sea level, which is about 14.7 psi.
If an evaporator has a pressure drop of10psig and the low side pressure is 15psig what is the pressure at the inlet of the evaporator?
To find the pressure at the inlet of the evaporator, you subtract the pressure drop from the low side pressure. Given a low side pressure of 15 psig and a pressure drop of 10 psig, the inlet pressure would be 15 psig - 10 psig = 5 psig. Therefore, the pressure at the inlet of the evaporator is 5 psig.
How do you convert psig tp psia?
PSIG refers to pound/force per square inch gauge, while PSI measures the pressure relative to a vacuum. If you want to convert a figure from PSIG to PSI, you would need to add 14.7psi to your PSIG figure, which will give you your PSIA result.
Psig?
Psi’s-14.696
When leak testing a low pressure centrifugal with nitrogen what is the maximum test pressure?
10 psig
