answersLogoWhite

0

150 Hz

User Avatar

Wiki User

11y ago

What else can I help you with?

Related Questions

What is the frequency of 95-100?

195


How many tones equal to 1 unit?

There are 100 cents in a semitone, so there are 1200 cents in an octave. Since an octave is equal to doubling the frequency, there are 2 tones (whole steps) in an octave.


What frequency are ultrasonic waves?

Ultrasonic waves have a frequency range above the audible limit of human hearing, typically between 20 kHz and 100 kHz.


What is a disadvantageof using the twisted pair cable?

The disadvantage is that attenuation increases with frequency above 100 kHz in these cables.


What is the operational frequency of half wave dipole antenna?

Its resonant frequency is where its length is half a wavelength, so for 100 MHz the wavelength is 3 metres and a 1.5-metre long dipole is resonant. A dipole antenna can be used for many applications within a band of 10-20% around the resonant frequency.


What is the output frequency of a half wave rectifier circuit if its input voltage has a frequency of 50 Hz?

The half-wave rectifier is conducting during only half of each cycle, so the fundamental output frequency is 50 Hz, and there are loads of harmonics of 50 Hz. also present in the output.


How do you draw a graph between frequency and gain when frequency ranges from 100 to 1000000?

1------------10000001 100


What is the period of the wave if the frequency is 100 hz?

Period = 1 / frequency = 1/100 = 0.01 second.


What is height above sea level of 9 Pigeon Mountain Road Half Moon Bay Auckland?

100


If a signal has a frequency of 100 HZ and a phase of 180 degrees how much time has the wave been offset from 0?

The period - the time for one full cycle - is the reciprocal of the frequency. If the frequency is in Hz, the time will be in seconds.From 0 to 180 degrees is one-half of a full cycle.


What is half of 50 out of 100?

Half of "50 out of 100" is 25 out of 100.


What is the frequency of a tone with a period of 100 milliseconds?

The frequency of a tone with a period of 100 milliseconds is 10 Hz. Frequency is the reciprocal of period, so to find frequency, you would take 1 divided by the period in seconds (0.1 seconds in this case).