answersLogoWhite

0

When the lens is slowly lifted up from the glass plate the vision of the viewer changes. This is due to readjustment of the retina present in our eyes.

User Avatar

Wiki User

14y ago

What else can I help you with?

Continue Learning about Physics

What would happen if a glass plate is replaced by a plane mirror?

If a glass plate is replaced by a plane mirror, the mirror will reflect an image of the objects in front of it. The mirror will not refract light like the glass plate would, and the reflected image will appear to be at the same distance behind the mirror as the object is in front of it.


Why is the interference effect due to glass plate and lens ignored in newtons rings?

The interference effect due to the glass plate and lens is ignored in Newton's rings because the refractive index of the air gap between the lens and glass plate is very close to that of the glass, causing minimal phase difference. This results in the interference pattern being primarily influenced by the air film between the lens and glass plate.


How do you turn a glass full of water upside down without spilling it?

One way to turn a glass full of water upside down without spilling it is to place a piece of cardboard or a small plate over the mouth of the glass, then flip the glass upside down while holding the plate/cardboard in place. Once the glass is upside down, carefully remove the plate/cardboard to reveal the water remaining in the glass.


Thin-film interference occurs when one clean glass plate it placed on top of another glass plate What does the thin film consist of in this case?

In this case, the thin film consists of the air gap between the two glass plates. When light reflects off the top surface of the top glass plate and the bottom surface of the bottom glass plate, interference patterns are created due to the difference in optical path lengths caused by the varying thickness of the air gap.


Why glass plate in newton 's ring experiment is inclined at 45 degrees?

The glass plate in Newton's ring experiment is inclined at 45 degrees to avoid interference effects caused by reflections from the two surfaces of the glass plate. At this angle, the reflections from the top and bottom surfaces of the glass plate exhibit a relative phase difference of 180 degrees, which cancels out interference effects, allowing for clear observation of the interference fringes.

Related Questions

What would be observed in the microscope if the lens were slowly lifted clear of the flat plate?

you will see the molecules that in the inside and outside of the thing that you use in experimenting


What would happen if a glass plate is replaced by a plane mirror?

If a glass plate is replaced by a plane mirror, the mirror will reflect an image of the objects in front of it. The mirror will not refract light like the glass plate would, and the reflected image will appear to be at the same distance behind the mirror as the object is in front of it.


What happen to force between two charged bodies when a glass plate is introduced in between them?

The presence of a glass plate between two charged bodies can act to reduce the force between them. The glass plate can act as an insulator, reducing the interaction between the charges on the bodies and thus decreasing the force of attraction or repulsion between them.


How did the movement of create the Himalayas?

The Himalayas were lifted by the subduction of the Indian tectonic plate under the Eurasian Plate,


What is the use of a glass plate in laboratories?

On a glass plate chemistry experiments can be performed on very small scale.In medicine and biology the glass plate can be used as support for samples.


When was Through a Frosty Plate Glass created?

Through a Frosty Plate Glass was created in 2001.


Did the movement of plates create the Himalayas?

The Himalayas were lifted by the subduction of the Indian tectonic plate under the Eurasian Plate,


What company does manufacture plate glass?

There are several companies that manufacture plate glass. For example Pilkington based in the UK and Pittsburgh Plate Glass based in the USA both manufacture this product.


What is the power of glass plate?

No


When was Pittsburgh Plate Glass Company Building created?

Pittsburgh Plate Glass Company Building was created in 1910.


When was Pittsburgh Plate Glass Enamel Plant created?

Pittsburgh Plate Glass Enamel Plant was created in 1937.


How was Vancouver island made?

It was made when the Juan De Fuca plate went under the North American plate and lifted part of the North American plate.