I think total internal reflection
nwater * sin 30=nair *sin(angle of refraction) 1.33*0.5=1*sin(angle of refraction) sin(angle of refractiob)=0.665 angle of refraction inair=41.6 degrees nwater * sin 30=nair *sin(angle of refraction) 1.33*0.5=1*sin(angle of refraction) sin(angle of refractiob)=0.665 angle of refraction inair=41.6 degrees
Light bends away from the normal (angle of incidence < angle of refraction) and travels at a faster speed in the medium with lower index of refraction.
When light enters a less dense medium at an angle, it will bend away from the normal (angle of incidence is greater than angle of refraction) due to refraction. This bending occurs because the speed of light changes as it enters a medium with a different refractive index.
If the angle of incidence equals the critical angle, the angle of refraction would be 90 degrees. This occurs when light travels from a denser medium to a less dense medium and undergoes total internal reflection.
The prism angle affects the amount of refraction of light passing through a prism. A larger prism angle results in greater refraction, causing the light to bend more as it passes through the prism. Conversely, a smaller prism angle leads to less refraction and a smaller bending of the light.
This means no refraction occurs i.e. Total internal reflection (all light reflected) occurs
The angle if refraction also increases.
A right angle.
The angle of incidence is greater.
The angle of refraction for a beam of light striking a diamond at an angle of 45 degrees will depend on the refractive index of the diamond material. The angle of refraction would be less than 45 degrees due to the bending of light as it enters the denser medium of the diamond.
nwater * sin 30=nair *sin(angle of refraction) 1.33*0.5=1*sin(angle of refraction) sin(angle of refractiob)=0.665 angle of refraction inair=41.6 degrees nwater * sin 30=nair *sin(angle of refraction) 1.33*0.5=1*sin(angle of refraction) sin(angle of refractiob)=0.665 angle of refraction inair=41.6 degrees
An angle greater than 0 but less than 90 degrees is an acute angle An angle of 90 degrees is a right angle An angle greater than 90 but less than 180 degrees is an obtuse angle An angle greater than 180 degrees is a reflex angle
When light is incident on a surface at 30 degrees and the reflected and refracted rays are perpendicular, it means the angles of reflection and refraction add up to 90 degrees (since they are complementary angles). Therefore, the angle of refraction can be calculated as 60 degrees by subtracting the incident angle from 90 degrees. This is based on the principle of Snell's Law, which states that the angle of incidence and angle of refraction are related through the refractive indices of the two mediums.
When the angle = 90 degrees, it is a Right Angle. When the angle is greater than 90 degrees, it is an obtuse angle.
An angle greater than 90 degrees is an obtuse angle or a reflex angle if it is greater than 180 degrees
It does not move from glass to air but undergoes internal refraction. That is, it is refracted back into the glass at the interface.
Light bends away from the normal (angle of incidence < angle of refraction) and travels at a faster speed in the medium with lower index of refraction.