A mechanical stopwatch can measure a time interval of up to 0.1 seconds. It has a knob that is used to wind the spring that powers the watch. It can also be used as a start-stop and reset button. The watch starts when the knob is pressed once.
The Electronic Stopwatch keeps time for an unlimited number of splits and registers 1/100th for the first 30 seconds, and 1 second . thereafter for up to 24 hours. It includes a programmable alarm, and displays the current date, time and month.
The main difference between mechanical and electromagnetic waves is how they travel. Mechanical waves require a medium, such as air or water, to propagate, while electromagnetic waves can travel through a vacuum.
The primary difference between mechanical and electromagnetic waves is how they travel. Mechanical waves require a medium, such as air or water, to propagate, while electromagnetic waves can travel through a vacuum, like in space.
The main difference between mechanical and electromagnetic waves is that mechanical waves require a medium (such as air or water) to travel through, while electromagnetic waves can travel through a vacuum (empty space) because they do not require a medium.
Friction is the main force that causes a difference between the ideal and actual mechanical advantage. Other factors like misalignment of the machine parts, wear and tear, and measurement inaccuracies can also contribute to this difference.
A wristwatch is worn on the wrist and tells the current time. A stopwatch is held in the hand, and is used to time the duration of an event. A wristwatch is always running, telling the time. A stopwatch is started and then stopped.
An electronic stopwatch gives a higher accuracy than a mechanical stop watch.
In an electronic switch there are no mechanical/moving parts - the switching action is achieved entirely within the electronic components. Electronic relays are generally a mechanical switch controlled by electronics.
The 3A has a mechanical distributor (points) and the 3AC has an "electronic" distributor.
The difference between an electronic organ and an electronic piano is in the sounds produced. Sometimes, on the higher end models, the electronic piano will have a piano touch, weighted keyboard.
The main difference between electronic shutter and mechanical shutter in cameras is how they operate. Electronic shutter uses a sensor to capture the image electronically, without any physical movement. This results in a silent operation and allows for faster shutter speeds. Mechanical shutter, on the other hand, uses physical curtains to block and expose the sensor, creating a distinctive sound and limiting the maximum shutter speed. In summary, electronic shutter is quieter and faster, while mechanical shutter is more traditional and has limitations on speed.
The STD model is mechanical, the Celect and Celect Plus models use electronic controls.
?!
mechanical moves it self electrical bad noise
A manual database is MANUAL and an electronic is electronic LOL! Simple :P
MPPT (Maximum Power Point Tracking) is an electronic system that normally operates with PV module. In other word, it is not a kind of mechanical tracking system. Because MPPT is a fully electronic system that varies the electrical operating point of the modules so that the modules are able to deliver maximum available power and MPPT can also be used in conjunction with a mechanical tracking system, but the two systems are completely different.
In mechanical sandwich we are having placement and training in 5th and 8th Semester.
mechanical coupling can be called as a mechanical device which is used to connect two mechanical links as well as transmit power between them. mechanical joint is just used to joint two linkages . there is no power or torque transmission between them .