0
Longitudinal feed control in a lathe refers to the movement of the cutting tool along the length of the workpiece, while transverse feed control refers to the movement of the cutting tool across the diameter of the workpiece. These controls allow for precise shaping and cutting of the workpiece to achieve the desired dimensions and surface finish.
What else can I help you with?
What is the pourpose of split-nut lever?
The split-nut lever is used to engage and disengage the split nut on a lathe machine to control the automatic feed of the carriage. By using the split-nut lever, the operator can control when the carriage moves along the length of the lathe bed during automatic feed operations.
What is the longitudinal feed?
Longitudinal feed refers to the movement of the cutting tool along the length of the workpiece during a machining operation. It determines the rate at which material is removed from the workpiece and influences the surface finish and efficiency of the machining process.
How do you change the feed rate on the pellet stove?
To change the feed rate on a pellet stove, consult the owner's manual for specific instructions, as the process can vary by model. In general, the feed rate is adjusted using the control panel or a dial on the stove. Make small adjustments and monitor how they affect the stove's performance until you achieve the desired feed rate.
How could you adjust force feed lubricator flow?
To adjust the flow of a force feed lubricator, you can typically control it using a flow adjustment knob or screw located on the lubricator. Turning the knob or screw clockwise increases the flow rate, while turning it counterclockwise decreases the flow rate. It's important to refer to the specific manufacturer's instructions for proper adjustment.
What does LF mean as a unit?
LF typically stands for Line Feed, which is a control character that advances the printing position to the next line on a display or printer. In computing, LF is used in text files to denote the end of a line.
What is cross feed and longitudinal feed in lathe?
Longitudinal feed is parallel to the axis of rotation of the spindle. Cross feed is perpendicular.
What is feed in lathe in machine?
non- examples of feed in lathe machine?
What is carriage in lathe machine?
carriage is a part of lathe which means to be support cutting tool to give feed to cutting tool and control cutting action.
What is the apron on a lathe?
The apron on a lathe is suspended from the saddle. It houses a gearbox connecting the carriage hand wheel to the rack enabling longitudinal movement of the saddle. It also houses the half nut and its lever for thread cutting and power feed levers.
What is the pourpose of split-nut lever?
The split-nut lever is used to engage and disengage the split nut on a lathe machine to control the automatic feed of the carriage. By using the split-nut lever, the operator can control when the carriage moves along the length of the lathe bed during automatic feed operations.
What hand wheel do you use to face on a lathe?
The cross slide hand wheel is used for facing on a lathe if the automatic feed is not engaged.
What is the difference between a milling machine and a lathe?
A milling machine basically look like a drill press, but with the ability to move the work piece sideways. A lathe clamp and spin the work piece horizontally and use a stationary tool bit to cut and shape the work piece.
What is the difference between a metal lathe and a wooden lathe?
Milling in a lathe can be two things:A cutter is gripped in the chuck and a workpiece the the tool post. The work piece is then milled by using the feed on the lathe. Although it has been done, it is an unconventional method and is not recommended.A 3-in-1 lathe with a milling attachment as part of the machine used for milling a work piece.
What is the longitudinal feed?
Longitudinal feed refers to the movement of the cutting tool along the length of the workpiece during a machining operation. It determines the rate at which material is removed from the workpiece and influences the surface finish and efficiency of the machining process.
Which turret lathe has rods?
All turret lathes have rods. These rods are called feed rods and their purpose is to transfer mechanical power from the main drive and gearbox of the lathe to the apron attached to the saddle. This enables automatic movement of the saddle enabling unassisted cutting of a workpiece once the feed is engaged.
What is the difference between auto and semi auto lathe?
In auto lathe machine, All the processes is automatic from the beginning to the end . Machine take working pieces from the workpiece box where all the pieces loaded initially,then all the processes done on the workpieces as per the command is given initially . final product comes out finally. But in semi lathe machine , all the work is same as automatic lathe but feed is not automatic it done by manually by technician .
Is there a nickname for the holes that you rip off in tractor feed computer paper?
The site below calls them "longitudinal marginal strips with tractor feed holes." I don't know if there's another name for them or not.
