The least count of a steel tape measure typically ranges from 0.1 mm to 1 mm, depending on the precision of the tape measure. This means that the smallest measurement that can be accurately read and recorded on the tape measure falls within that range.
0.5mm
The formula to calculate the least count of a micrometer is: Least count = Pitch of screw gauge / Number of divisions on circular scale
for a levelling staff the least count is 0.01in and in m 0.005m
Investigators use a steel tape at a crime scene to accurately measure distances between evidence, to document the size and layout of the scene, and to create sketches or diagrams for future reference or analysis. The durability and flexibility of steel tape make it a reliable tool for documenting crime scenes.
The least count of a thermometer is the smallest temperature difference that it can measure accurately. Typically, for a standard mercury-in-glass thermometer, the least count is 0.1°C.
o.1cm
0.5mm
I have steel rules that are marked down to 1/64 of an inch.
Metallic tape is any tape with an aluminum, steel or decorative foil on the outer surface. Steel tape s the general term for a steel tape measure or ruler or a metallic tape with a street foil surface.
To rewind a steel fish tape unscrew the cover. Gently lift the cover so that the steel tape does not come out. With time and patience, rewind the tape. Finally put the cover back on and screw it back in place.
Armored cable that has a inbedded tape that is used for grounding purposes. The steel tape is wrapped around the inner conductors which carry the load current. A heavy rubber coating is applied over the steel tape layer. The steel and heavy rubber helps protect the cable from physical damage, e.g. by someone digging in the ground where the cable is buried.
least count of scale is 1mm
It is a steel tape hooked onto a steel coil spring. It is dangerous to open as the spring may uncoil viciously.
Steel tape is the perfect industrial measuring tool used to measure products. It is especially used for measuring irregular and regular shapes.
least count means L.C.
5 mm is the least count of theodolite.
least count for micrometer is 0.01mm0.01 mm