a fuse main purpose is to quickly disconnect a short circuit. when the current passing through it exceed its rated value
The main difference between a T fuse and an F fuse is the time it takes for the fuse to blow and interrupt an electrical circuit. T fuses have a time-delay feature, meaning they can withstand temporary overloads without blowing. F fuses, on the other hand, are fast-acting and blow quickly when they detect an overload.
Voltage and potential difference are essentially the same thing in an electrical circuit. Voltage is the measure of potential difference between two points in a circuit. In other words, voltage is the force that pushes electric charges through a circuit, and potential difference is the measure of this force.
The phase difference between the current through the resistor and inductor in an AC circuit is 90 degrees.
Potential difference and voltage are essentially the same thing in an electrical circuit. Voltage is the measure of potential difference between two points in a circuit, indicating the amount of energy that can be transferred between those points. In other words, potential difference is the technical term for voltage in the context of electrical circuits.
the purpose of a voltmeter is used to measure voltage in a circuit
what is the difference between miniature circuit breaker and fuse
Muaja Kaya Pata ..
The voltage rating of a fuse (in this case 125V or 230V) defines the maximum circuit voltage that the fuse is safe to be used on. A fuse with a voltage rating of 125V should not be used in a circuit with a voltage greater than 125V. If a 125V fuse were installed in a 230V circuit and an overload current occurred, the fuse could explode.
difference between series is one pathway through circuit,difference between parralal is more then one pathway through circuit.
difference between p type and n type semiconducter materialAnswerInsulation is used to prevent a short current. To protect the circuit should a short-circuit fault occur is either a fuse or a circuit breaker.
a mlln circuit is a data circuit
Current is flow of electricity charge. Voltage is a measure of potential energy or charge. Fuse. Is a device that opens when the current rating is exceeded this stopping the flow of current.
The main difference between a T fuse and an F fuse is the time it takes for the fuse to blow and interrupt an electrical circuit. T fuses have a time-delay feature, meaning they can withstand temporary overloads without blowing. F fuses, on the other hand, are fast-acting and blow quickly when they detect an overload.
magnetic circit has a magnet and electri circuit has electricity
There is no difference. Slo-Blo is just a trademarked name for a time delay fuse.
Voltage and potential difference are essentially the same thing in an electrical circuit. Voltage is the measure of potential difference between two points in a circuit. In other words, voltage is the force that pushes electric charges through a circuit, and potential difference is the measure of this force.
It does not have a circuit breaker. It uses a fuse to protect the circuit. Look for a blown fuse in the fuse panel under the dash on the drivers side.I believe the cigarette lighter circuit is protected with a glass barrel fuse not a circuit breaker. Check the fuse box for a blown fuse.