Frequency and wavelength are related by a formula. Please see the following link for more detailed information about this.
To find the frequency of the blue light, we need to use the formula: frequency (f) = speed of light (c) / wavelength (λ). The speed of light is approximately 3.0 x 10^8 meters per second. Converting the wavelength from angstroms to meters (1 angstrom = 1 x 10^-10 meters), we get 4000 angstroms = 4 x 10^-7 meters. Plugging these values into the formula, we get f = (3 x 10^8) / (4 x 10^-7) = 7.5 x 10^14 Hz = 750 THz, which is equivalent to 750,000 GHz.
To find the frequency, we can use the formula: speed = frequency x wavelength. The speed of light is approximately 3.00 x 10^8 m/s. Converting the wavelength to meters (4000 Å = 4000 x 10^-10 m), you can find the frequency to be approximately 7.5 x 10^14 Hz, which is equivalent to 750 THz (terahertz).
380 nanometers [Violet] to 750 nanometers [Red].1 nanometer = 10 Angstroms.3800 Angstroms [Violet] to 7500 Angstroms [Red].
This is a good question, and one that is of interest to those concerned with the environment. To understand energy in light, we need to understand waves and wavelengths.Consider waves on an ocean - each wave has a high peak and a low trough, and the ocean is an endless cycle of peaks and troughs. If we were to measure the distance from one peak to the next peak, that measurement would describe the length of one wave. This measurement is appropriately called the wavelength. On the ocean, we would likely measure wavelengths in feet or meters.Light travels in waves too, but unlike ocean waves, light waves are so small that we cannot see individual light waves. In fact, light waves are so infinitesimally tiny, we describe light wavelengths in nanometers (a nanometer is one billionth of one meter) or often in Angstroms (1 tenth of a nanometer, or one ten-billionth of one meter).Visible light ranges in wavelength from approximately 4000 Angstroms (blue) to 7000 Angstroms (red). Blue light is therefore carried by waves that are shorter than red light.Ultraviolet light has even shorter waves than blue light (100 to 4000 Angstroms), while at the other end of the spectrum, infrared has even longer waves than red (7000 to 10,000,000 Angstroms).The amount of energy in light is inversely proportional to its wavelength. In other words, as the wavelength of light becomes shorter (more blue), the energy carried by that wave becomes higher. Specifically, the energy calculation for light is:E (hc)/λ,Where h is Planks Constant, C is the speed of light, and λ is the wavelengthWhile we will not concern ourselves with the mathematics here, the following statements help illustrate the relationship between light color and energy:Blue light (4000 Angstroms) has 75% more energy than red light (7000 Angstroms) when both lights are exactly the same brightnessUltraviolet light (1750 Angstroms) has four times more energy than red light of the same brightnessAs an aside, the relationship between light color and energy is what has so many people concerned about the ozone layer. The ozone layer is a very high, very thin layer of ozone (O3), and one interesting property of ozone is that it filters out ultraviolet light. Without the ozone layer, high energy ultraviolet light penetrates the atmosphere, and reaches us on the Earth's surface. Because ultraviolet light carries so much more energy at the same brightness than visible light, it has the potential to cause more damage to our bodies, including cancer.
Sure, if it is AC (alternating current), you can calculate a wavelength. For example, in copper the speed is roughly 2/3 the speed of light in a vacuum, that is, 200,000 km/sec.; electricity in our homes comes at a frequency of 50 or 60 cycles per second; so (assuming the frequency of 50 cycles), that would give you a wavelength of 200,000 km/sec / 50 Hertz = 4000 km.Sure, if it is AC (alternating current), you can calculate a wavelength. For example, in copper the speed is roughly 2/3 the speed of light in a vacuum, that is, 200,000 km/sec.; electricity in our homes comes at a frequency of 50 or 60 cycles per second; so (assuming the frequency of 50 cycles), that would give you a wavelength of 200,000 km/sec / 50 Hertz = 4000 km.Sure, if it is AC (alternating current), you can calculate a wavelength. For example, in copper the speed is roughly 2/3 the speed of light in a vacuum, that is, 200,000 km/sec.; electricity in our homes comes at a frequency of 50 or 60 cycles per second; so (assuming the frequency of 50 cycles), that would give you a wavelength of 200,000 km/sec / 50 Hertz = 4000 km.Sure, if it is AC (alternating current), you can calculate a wavelength. For example, in copper the speed is roughly 2/3 the speed of light in a vacuum, that is, 200,000 km/sec.; electricity in our homes comes at a frequency of 50 or 60 cycles per second; so (assuming the frequency of 50 cycles), that would give you a wavelength of 200,000 km/sec / 50 Hertz = 4000 km.
750 million
To find the frequency of the blue light, we need to use the formula: frequency (f) = speed of light (c) / wavelength (λ). The speed of light is approximately 3.0 x 10^8 meters per second. Converting the wavelength from angstroms to meters (1 angstrom = 1 x 10^-10 meters), we get 4000 angstroms = 4 x 10^-7 meters. Plugging these values into the formula, we get f = (3 x 10^8) / (4 x 10^-7) = 7.5 x 10^14 Hz = 750 THz, which is equivalent to 750,000 GHz.
yes, visible rays have wave length from 7000-4000 and X-rays have 10-0.1 in angstroms
To find the frequency, we can use the formula: speed = frequency x wavelength. The speed of light is approximately 3.00 x 10^8 m/s. Converting the wavelength to meters (4000 Å = 4000 x 10^-10 m), you can find the frequency to be approximately 7.5 x 10^14 Hz, which is equivalent to 750 THz (terahertz).
380 nanometers [Violet] to 750 nanometers [Red].1 nanometer = 10 Angstroms.3800 Angstroms [Violet] to 7500 Angstroms [Red].
Visible light is part of the electromagnetic spectrum. The visible part has wavelengths of 7000 to 4000 Angstroms. The frequencies are 4.0 - 7.0 x 1014 Hz.
This is a good question, and one that is of interest to those concerned with the environment. To understand energy in light, we need to understand waves and wavelengths.Consider waves on an ocean - each wave has a high peak and a low trough, and the ocean is an endless cycle of peaks and troughs. If we were to measure the distance from one peak to the next peak, that measurement would describe the length of one wave. This measurement is appropriately called the wavelength. On the ocean, we would likely measure wavelengths in feet or meters.Light travels in waves too, but unlike ocean waves, light waves are so small that we cannot see individual light waves. In fact, light waves are so infinitesimally tiny, we describe light wavelengths in nanometers (a nanometer is one billionth of one meter) or often in Angstroms (1 tenth of a nanometer, or one ten-billionth of one meter).Visible light ranges in wavelength from approximately 4000 Angstroms (blue) to 7000 Angstroms (red). Blue light is therefore carried by waves that are shorter than red light.Ultraviolet light has even shorter waves than blue light (100 to 4000 Angstroms), while at the other end of the spectrum, infrared has even longer waves than red (7000 to 10,000,000 Angstroms).The amount of energy in light is inversely proportional to its wavelength. In other words, as the wavelength of light becomes shorter (more blue), the energy carried by that wave becomes higher. Specifically, the energy calculation for light is:E (hc)/λ,Where h is Planks Constant, C is the speed of light, and λ is the wavelengthWhile we will not concern ourselves with the mathematics here, the following statements help illustrate the relationship between light color and energy:Blue light (4000 Angstroms) has 75% more energy than red light (7000 Angstroms) when both lights are exactly the same brightnessUltraviolet light (1750 Angstroms) has four times more energy than red light of the same brightnessAs an aside, the relationship between light color and energy is what has so many people concerned about the ozone layer. The ozone layer is a very high, very thin layer of ozone (O3), and one interesting property of ozone is that it filters out ultraviolet light. Without the ozone layer, high energy ultraviolet light penetrates the atmosphere, and reaches us on the Earth's surface. Because ultraviolet light carries so much more energy at the same brightness than visible light, it has the potential to cause more damage to our bodies, including cancer.
Sure, if it is AC (alternating current), you can calculate a wavelength. For example, in copper the speed is roughly 2/3 the speed of light in a vacuum, that is, 200,000 km/sec.; electricity in our homes comes at a frequency of 50 or 60 cycles per second; so (assuming the frequency of 50 cycles), that would give you a wavelength of 200,000 km/sec / 50 Hertz = 4000 km.Sure, if it is AC (alternating current), you can calculate a wavelength. For example, in copper the speed is roughly 2/3 the speed of light in a vacuum, that is, 200,000 km/sec.; electricity in our homes comes at a frequency of 50 or 60 cycles per second; so (assuming the frequency of 50 cycles), that would give you a wavelength of 200,000 km/sec / 50 Hertz = 4000 km.Sure, if it is AC (alternating current), you can calculate a wavelength. For example, in copper the speed is roughly 2/3 the speed of light in a vacuum, that is, 200,000 km/sec.; electricity in our homes comes at a frequency of 50 or 60 cycles per second; so (assuming the frequency of 50 cycles), that would give you a wavelength of 200,000 km/sec / 50 Hertz = 4000 km.Sure, if it is AC (alternating current), you can calculate a wavelength. For example, in copper the speed is roughly 2/3 the speed of light in a vacuum, that is, 200,000 km/sec.; electricity in our homes comes at a frequency of 50 or 60 cycles per second; so (assuming the frequency of 50 cycles), that would give you a wavelength of 200,000 km/sec / 50 Hertz = 4000 km.
An angstrom = 1 x 10-10 meters A nanometer = 1 x 10-9 meters you can see that a nanometer is ten times larger than an angstrom, so to convert angstroms into nanometers we must divide the angstrom value by 10. 7000/10 = 700nm
Ha 4000 Armstrong!? i think you mean angstrom (10^-10 meters). im not sure exactly what the equation you need is but i think that's the Compton effect. google that.
2.012 x 10^(16)
The velocity of light is constant in a given medium, independent of wavelength. Therefore, the ratio of velocities of light rays with wavelengths 4000 Å and 8000 Å in the same medium is 1:1.