answersLogoWhite

0

when the friction plate is pressed by the pressure plate a torsional vibration is developed in order to dampen this vibration torsional springs are provided in the spring plate this springs are also called damper spring.

User Avatar

Wiki User

12y ago

What else can I help you with?

Continue Learning about Physics

What role does friction play in plate motion?

Friction between tectonic plates helps to resist their motion and build up stress along plate boundaries. When this stress overcomes the frictional resistance, it causes earthquakes as the plates suddenly slip past each other. Friction also influences the type and direction of plate movements, such as subduction or transform boundaries.


Kinetic frictions is the frictional force needed to start an object at rest into motion?

false. Kinetic friction is the friction acting upon a moving object. It would be the frictional force against you if you pulled a box across a table. Static friction is the frictional force needed to overcome to get an object at rest into motion.


How does a spring latch work?

A spring latch is a type of door latch that uses a spring-loaded mechanism to keep the door closed. When the door is shut, the latch automatically engages a strike plate, securing the door in place. To open the door, you simply turn the handle or knob which compresses the spring and releases the latch mechanism.


What is the function of the rotating plate of a microscope?

The rotating plate, also known as a stage, holds the specimen and can be rotated to view different areas. This allows for precise positioning and examination of the specimen under the microscope.


What are 2 ways to measure force?

Two ways to measure force are using a spring balance, which relies on Hooke's Law to measure the extension of a spring when a force is applied, and using a force plate, which measures the force exerted on it by an object standing or jumping on it.

Related Questions

What is torsion stress?

I need to calculate the stress resulting from a torsion moment on a hollow steel section as well as a flat plate.


What Is The Function Of A Throw Out Bearing?

It presses the spring loaded levers that release the presure on the clutch plate.


When replacing stock clutch plates with screamin eagle clutch pack with nine friction plates and eight spacer discs do you use the spring plate with this clutch?

yes you do use a spring plate, due to the fact of the amount of fricion the disc will undertake.


What happens inside a clutch when you push the clutch pedal?

The pressure plate which forces the friction disc against the flywheel by means of spring plates. Pressing the clutch pedal down forces the pressure plate away from the friction disc and power transfer from engine to transmission is broken.


What does a flywheel cover plate do?

It sandwiches the clutch friction plate to the flywheel. The flywheel is connected to the engine, the friction plate is connected to the gearbox. Strong springs inside the cover plate hold the friction plate firmly to the flywheel. When the clutch lever is operated, springs in the cover plate are compressed, thus releasing the pressure on the friction plate, disengaging the gearbox from the engine.


What does the clutch center plate with spring hub do?

The clutch centre plate with spring hub help in holding the spring leaf spring in place in a vehicle.


Do plate boundaries cause friction?

Yes, friction boundaries cause friction whenever they move. Whenever there's movement, there's friction or rubbing of one plate against the other or of a plate against the earth's mantle.


Removing a 1986 celebrity steering wheel lock plate?

To take the lock plate off requires a lock plate spring compressor. With the spring compressor in place and the spring slightly compressed remove the circlip that holds the lock plate on. Then release the spring compressor and the lock plate simply slides off.


What is the friction disc on your snowblower?

There is a beveled plate with a round plate that sits vertically against it and as you move your gear lever it slides closer to the center or closer to the outside edge of the beveled plate as you move speed gears back and forth. Your friction plate has rubber around the outside edge that runs against the other plate. Hence the reason it is called a friction plate.


Where are the safe jacking points on the new VW beetle?

The safe jacking point on the new VW Beetle is at the drain plug. Use a square of plywood on the floor jack. The stand goes under the forward spring plate or under the round outer torsion bar.


How do you increase torque through the driven plate?

To increase torque through the driven plate, you can adjust the friction material or increase the number of friction surfaces on the plate. Additionally, increasing the pressure on the driven plate by adjusting the clutch mechanism can also help increase torque.


What is the function of underliner plate?

it is the plate under the plate (kea nga UNDER plate!!!) hahaha