Air resistance is directly proportional to the surface area of an object. As the surface area of an object increases, there is more contact with air molecules, resulting in greater air resistance. This resistance can affect the speed and motion of the object.
The structure of the feather makes it catch the air and fall more slowly than the coin. Refer to the related link for the Apollo 15 mission to the moon, which has no atmosphere, in which an astronaut drops a hammer and a feather at the same time.
Yes. Under ideal circumstances - no air resistance, elastic collision (i.e., perfect bounce), the ball should bounce back to the same height from which it was dropped, due to conservation of energy. In practice, some energy is always lost, both due to air resistance and to a non-perfect bounce.
A rigid link is a structural component that connects two parts of a mechanism or machine in such a way that the relative position between the two parts remains fixed. It does not allow for any movement or flexibility between the connected parts. Rigid links are commonly used in engineering and design to provide stability and precise motion control.
Well, I am also doing this same question and its all about resistance. Resistance is when the electrons flow around a circuit and they collide with ions. These electrons transfer energy to the ions, which consequently get hot and move more so the resistance increases :) So the thicker the wire is, the less resistance it would have because there are more choices of pathways for the electrons can take without colliding with the ions. Therefore less resistance, more current needed to melt the wire. So the thicker the wire is, the more current is needed to melt it
There is no direct link between radiation exposure and costochondritis. Costochondritis is typically caused by inflammation in the cartilage that connects the ribs to the breastbone. However, radiation therapy can sometimes lead to inflammation in the chest area, which may present similar symptoms to costochondritis.
The link or bridge between negative and positive area is called a circuit
AC resistance should NOT be confused with IMPEDANCE or REACTANCE.When AC flows through a conductor, it tends to flow towards the surface of that conductor due to a phenomenon called the 'skin effect'. The skin effect, therefore, acts to reduce the effective cross-sectional area of the conductor. Since resistance is inversely-proportional to cross-sectional area, the result is an elevated value of resistance compared with that to DC current. This is called AC RESISTANCE, and it increases with frequency. At mains frequencies (50/60 Hz), AC resistance is not dramatically higher than DC resistance but the difference becomes significant at high frequencies.Read more in the Related link shown below this answer.
Increasing the Surface Area increases the heat loss. You will find a nice example in the related question link below.
Wind
(pi x D xH ) +2(pi R squared) If you are thinking of the surface area, then i have provide a link below.
This is a popular topic, discussed in many places on the web. The attached link is one place that I like. If you want to look for others just google for surface area square pyramid.
The structure of the feather makes it catch the air and fall more slowly than the coin. Refer to the related link for the Apollo 15 mission to the moon, which has no atmosphere, in which an astronaut drops a hammer and a feather at the same time.
An online calculator [see Link below] gives me:Lateral Area (total area of the triangular sides) = 137.75 cm2Total surface area including base of 25 cm2 = 162.75 cm2
The area is the product of the length of a thing times its width. l x w = A
Lateral surface area of a coner and l are the radius and slant height, respectively.A very quick "google" showspi x r x lreference: See related link below forthe reference
The more surface area of a solute is exposed to a solvent, the more quickly the solvent can act on the solute, dissociating it if it's ionic. This is why finely grained salt dissolves much more quickly than a large clump of salt.
Your sphere will have a surface area of about 201 square feet. The formula for finding the surface area (As) of a sphere is 4 times pi times the radius (r) squared, or this: As = 4 x pi x r2 That's As = 4 x 3.14 x 42 = 201.0619298 square feet. A link can be found for more information.