0
What else can I help you with?
What is the force that tends to keep a load from moving?
Friction is the force that tends to keep a load from moving. It acts in the opposite direction to the force applied to move the load, making it harder to overcome.
How far from the pivot must the 10000 N counter weight be placed in order to balance the load?
To balance the load of 10000 N, the counterweight must create an equal and opposite moment. Moment = Force × Distance. If the load is placed at a distance of 2 meters from the pivot, the counterweight should be placed 2 meters away on the opposite side to balance it.
Which direction will the load move if the force applied to the rope is greater than the force of gravity on the load?
I assume this is not a trick question of like the rope is not taut. If the rope is taut, the load will move to the combined force of the applied force and gravity, in the vector sense. In the simple case of the applied force being directly opposite to gravity, the load will rise straight up from the ground. If the applied force is perpendicular to gravity (that is, horizontal), the load will drop to the ground at an angle, depending on the sum of the two force vectors.
How are levers grouped?
Levers are grouped into three classes based on the relative position of the effort, load, and fulcrum. Class 1 levers have the effort and load on opposite sides of the fulcrum, Class 2 levers have the load between the effort and fulcrum, and Class 3 levers have the effort between the load and fulcrum.
Where are the effortloadand fulcrum located in a first class lever?
In a First Class lever, the fulcrum is between the effort and the load.
What is the binary opposite of reason?
The opposite action of to reason (to consider) is to react.
What is the opposite of weight?
For weight meaning heaviness, the opposite could be lightness. If it is used metaphorically to mean importance, the opposite is unimportance or triviality. In engineering, the opposite of a weight (load) can be a counterweight.
What is the difference between load and store instruction?
Load instruction means to load the instruction from the memory to the processor (accumulator).. But store instruction is opposite of it,it stores information from accumulator to the memory.
What is the force that tends to keep a load from moving?
Friction is the force that tends to keep a load from moving. It acts in the opposite direction to the force applied to move the load, making it harder to overcome.
How should pallets be stacked for a multi stop load?
Opposite the order in which they're being delivered.
How far from the pivot must the 10000 N counter weight be placed in order to balance the load?
To balance the load of 10000 N, the counterweight must create an equal and opposite moment. Moment = Force × Distance. If the load is placed at a distance of 2 meters from the pivot, the counterweight should be placed 2 meters away on the opposite side to balance it.
What are the methods of manually handling and moving loads?
think be fore lifting and handling load. when pulling never walk back words. when carry by holding load at opposite corners.
Which direction will the load move if the force applied to the rope is greater than the force of gravity on the load?
I assume this is not a trick question of like the rope is not taut. If the rope is taut, the load will move to the combined force of the applied force and gravity, in the vector sense. In the simple case of the applied force being directly opposite to gravity, the load will rise straight up from the ground. If the applied force is perpendicular to gravity (that is, horizontal), the load will drop to the ground at an angle, depending on the sum of the two force vectors.
What load impedance Z will result in maximum power transfer from an electric source with an internal impedance of r?
For maximum power transfer, source resistance should match load resistance and source reactance should match load reactance with the opposite sign (so if the load is capacitive, the source should be inductive).
How are levers grouped?
Levers are grouped into three classes based on the relative position of the effort, load, and fulcrum. Class 1 levers have the effort and load on opposite sides of the fulcrum, Class 2 levers have the load between the effort and fulcrum, and Class 3 levers have the effort between the load and fulcrum.
Torsion bar tool?
the torsion bar is actually a rod which is twisted when load is applied on opposite direction like couple
Where are the effortloadand fulcrum located in a first class lever?
In a First Class lever, the fulcrum is between the effort and the load.
