answersLogoWhite

0

If you are asking what pressure you should have entering the house it would be 10-11" WC (inches of water column) approximately with all appliances lit. I usually set regulator at 12" with nothing on and check for 10-11"wc at appliance burner manifold. The pressure in the tank is high. not sure I don't own a Gage to check. it will damage a water column psi Gage.It will blow the water out of a wc manometer. Some applications require a main regulator that feeds several smaller regulators and is usually set @ 10lbs or so. leave that one alone if you don't work for the propane company. A psi of <10" will cause a weak flame and suit build up. CO levels should be checked to make sure you don't asphyxiate anyone.

rule of thumb on a lp furnace residential type. under 10 years old. is tighten the regulator screw all the way in and back off a quarter turn on the furnace control valve inside the appliance to get the cleanest flame. I hope I helped. If you haven't had experience with LP gas be very careful. It is heavier than air and will linger in ambient. I have lost eyebrows and eyelashes.

These other guys make sense It is used in some refrigerants. I suppose the pressure coincides with the temperature. sometimes when I bbq the tank gets cold condensation and the flames are weak .

User Avatar

Wiki User

12y ago

What else can I help you with?

Continue Learning about Physics

What is the pressure in domestic LPG cylinder?

Pressure in an LPG cylinder is dependant of the ambient temperature and the LPG mix considered. For 70% Propane and 30% Butane at 20 degrees Celsius the pressure is 102 PSI (lb/sq.in.) or 703 KPa. Please be aware that the pressure inside an LPG vessel will not drop as vapour LPG is being used. LPG cylinder is not to be understood and dealt with as a pressurised gas storage cylinder that will drop in pressure if gas is being taken out of the cylinder. LPG cylinder contains both liquid and vapour, as vapour is being used at an appliance the liquid vaporises under natural conditions and generates more vapour, hence the efficiency of the LPG storage systems.


What is filling pressure in lpg cylinder?

The filling pressure in an LPG cylinder refers to the amount of pressure at which the cylinder is filled with liquefied petroleum gas. This pressure can vary depending on factors such as the type of gas being used and the ambient temperature. Typically, the filling pressure for LPG cylinders ranges from 2 to 10 bar.


What is the pressure for 50kg LPG gas cylinder?

The pressure in a 50kg LPG gas cylinder can vary, but typically it ranges from 2.0 to 2.3 MPa (megapascals) at 15°C.


How much pressure a LPG cylinder can take?

Typically, an LPG cylinder can handle pressure ranging from 7 to 18 bar (100 to 260 psi), depending on the specific type and design. However, it is important to always follow manufacturer's guidelines for safe handling and use of LPG cylinders.


What is the weight of empty lpg gas cylinder?

The weight of an empty LPG gas cylinder typically ranges from 15 to 35 kilograms, depending on the size and capacity of the cylinder.

Related Questions

What is the height of lpg cylinder in India?

15kg , 14.5kg , 5kg , 21 kg ,10kg


What is the pressure in domestic LPG cylinder?

Pressure in an LPG cylinder is dependant of the ambient temperature and the LPG mix considered. For 70% Propane and 30% Butane at 20 degrees Celsius the pressure is 102 PSI (lb/sq.in.) or 703 KPa. Please be aware that the pressure inside an LPG vessel will not drop as vapour LPG is being used. LPG cylinder is not to be understood and dealt with as a pressurised gas storage cylinder that will drop in pressure if gas is being taken out of the cylinder. LPG cylinder contains both liquid and vapour, as vapour is being used at an appliance the liquid vaporises under natural conditions and generates more vapour, hence the efficiency of the LPG storage systems.


What is filling pressure in lpg cylinder?

The filling pressure in an LPG cylinder refers to the amount of pressure at which the cylinder is filled with liquefied petroleum gas. This pressure can vary depending on factors such as the type of gas being used and the ambient temperature. Typically, the filling pressure for LPG cylinders ranges from 2 to 10 bar.


What is the pressure for 50kg LPG gas cylinder?

The pressure in a 50kg LPG gas cylinder can vary, but typically it ranges from 2.0 to 2.3 MPa (megapascals) at 15°C.


How much pressure a LPG cylinder can take?

Typically, an LPG cylinder can handle pressure ranging from 7 to 18 bar (100 to 260 psi), depending on the specific type and design. However, it is important to always follow manufacturer's guidelines for safe handling and use of LPG cylinders.


Why is LPG filled in cylinders under pressure?

LPG is filled in cylinders under pressure to keep it in its liquid state, which allows for more gas to be stored in a smaller volume. This enables easy transportation and storage of LPG cylinders for domestic and industrial use.


Is LPG high pressure or low pressure?

lpg is high pressure.


What is LPG cylinder?

A propane tank. A cigarette lighter. Almost anything that holds low pressure gas.


What gas is used in cooking lpg cylinder?

lpg gas


Which changes occurs when LPG comes out of the cylinder?

When LPG comes out of the cylinder, it changes from a liquid to a gas due to the decrease in pressure. This phase change causes it to expand rapidly and cool down, which is why LPG feels cold when released. The gas is then ready to be ignited and used as a fuel for various applications.


In lpg cylinder the gas filled is in the liquified state?

Yes, LPG (liquefied petroleum gas) is stored in liquid form under pressure in a gas cylinder. This allows for a larger volume of gas to be stored in a smaller space, making it easier for transportation and use.


What is the difference between domestic LPG and auto LPG?

Refer to related link below.