0
What else can I help you with?
If a mineral is 10 times heavier than water what is its specific gravity?
The specific gravity of a mineral that is 10 times heavier than water would be 10. Specific gravity is a unitless measure that compares the density of a mineral to the density of water, which is 1 g/cm3.
When was Super Extra Gravity created?
Super Extra Gravity was created on 2005-10-14.
If the gravity exerts 15 N and there is 10 N of friction how much force will Jim need to exert to move it?
Jim will need to exert at least 25 N of force to overcome both gravity and friction and move the object. This is calculated by adding the force of gravity (15 N) and the force of friction (10 N).
What is the weight of a 10 kilogram ball using 9.8 meters per second squared?
The weight of the ball is the force exerted on it due to gravity. Using the formula weight = mass x acceleration due to gravity, the weight of a 10 kilogram ball with an acceleration due to gravity of 9.8 m/s^2 is 98 Newtons.
A 10kg brick and a 1kg book are dropped in a vacuum the force of gravity on the 10-kg brick is?
The force of gravity on the 10kg brick is 98N. This is because the force of gravity is directly proportional to the mass of the object, and in this case, it is 10 times greater than the force of gravity on the 1kg book.
What is 10 ppm express in percentage?
10 ppm = 10/1,000,000 =0.001/100 = 0.001%
What is the dilution of 10 ppm to 1 ppm?
To dilute a 10 ppm solution to 1 ppm, you would mix 1 part of the 10 ppm solution with 9 parts of a diluent (such as water). This would result in a 1 ppm concentration because the concentration has been decreased by a factor of 10 during the dilution process.
What percent is 10 ppm?
10 ppm = 10/1,000,000 = 1/100,000 = 1/100,000*100% = 0.001%
What is the percentage of 10 ppm?
10 ppm as a fraction is 10 / 1 000 000 = 0.00001, as a percentage = (10 / 1 000 000) * 100 = 0.001 %
How much does 10 micrograms per deciliter of lead equal in ppm?
ppm means mg per litre. mg/l means 100ug/dl. Therefore there are 10 x 10 micrograms per decilitre in ppm. In other words, 10ug/dl is 0.1 ppm.
What has been the historical carbon dioxide percentage of air over the past 10 000 years?
From 10 000 BC till 1860, the pre-Industrial Age, the carbon dioxide in air was approximately 278 ppm (0.0278%). In 1900 it was 295 ppm. In 1960 it was 315 ppm. In 1980 it was 335 ppm. In 1990 it was 350 ppm. In 2000 it was 369 ppm. In 2010 it was 388 ppm. In 2011 it was 392 ppm. (March 2011)
How fast does a jet printer print?
Depends on the printer and the settings, but usually around 1 ppm on best quality, about 5 ppm on normal quality, and about 10 ppm on draft quality. Laser printers, on the other hand, range from ~10 to ~100 PPM.
How do you use a 100 ppm dilution to achieve 25ml of a 10 ppm dilution?
To prepare a 10 ppm dilution from a 100 ppm stock solution, you can use the dilution equation: C1V1 = C2V2, where C1 is the concentration of the stock solution, V1 is the volume of the stock needed, C2 is the desired concentration, and V2 is the final volume. Here, C1 is 100 ppm, C2 is 10 ppm, and V2 is 25 ml. Rearranging the equation to solve for V1 gives you V1 = (C2 * V2) / C1 = (10 ppm * 25 ml) / 100 ppm = 2.5 ml. Therefore, you need to take 2.5 ml of the 100 ppm solution and dilute it with 22.5 ml of solvent (water or another appropriate diluent) to achieve a total volume of 25 ml at 10 ppm.
How to express 0.00001 ppm in molecules per centimeter cubed?
To convert parts per million (ppm) to molecules per cubic centimeter, you need to know the molecular weight of the substance. Use Avogadro's number (6.022 x 10^23) and the formula: molecules/cm^3 = (ppm * density * 6.022 x 10^23) / (molecular weight * 10^6). This will give you the concentration of molecules per cubic centimeter.
How many ppm is equal to 10 microg per kg?
1 mg/kg = 1 ppm 1 mg = 1000 micrograms (ug) so 10 ug/kg = 0.01 mg/kg = 0.01 ppm
How many grams of salt is needed to make 10 ppm solution?
10 g is 10,000 mg and in 1 liter that would be 10,000 ppm. You need to have a volume in order to express the mass as ppm. In other words, 10 g NaCl cannot be expressed as parts per million unless you have the volume that it is in. If it's in a liter, then you will have 10,000 ppm.
How convert percentage to ppm?
A percentage is 'parts per hundred' and there are possibly 100 of them. ppm is parts per million. There are 10 000 hundreds in a million. So multiply your percentage by 10 000. i.e. 3% x 10 000 = 30 000 ppm. but check my math.
