answersLogoWhite

0

The strip of material that glows inside a light bulb is called the filament. It is usually made of tungsten and emits light when an electric current passes through it, heating it to a high temperature, causing it to glow and produce visible light. The filament is a crucial component in incandescent light bulbs, which have been widely used for many years, although more energy-efficient lighting technologies, such as LED (Light Emitting Diode) bulbs, are becoming increasingly popular

User Avatar

YOUTUBE MASTER

Lvl 2
1y ago

What else can I help you with?

Continue Learning about Physics

The electric light incredible as it may appear is produced from a tiny strip of paper that breath would blow away Through this tiny strip of a paper is passed an electric current and the result?

The electric light is produced by passing an electric current through a tiny strip of paper coated with a light-emitting material. When the current flows through the strip, it excites the material, causing it to emit light. This process of converting electrical energy into light is how electric lights work.


How does reflective strips glow?

Reflective strips contain tiny glass beads that are coated with a reflective material. When light hits these beads, it is reflected back towards the source, making the strip appear bright and visible in low-light conditions. This reflection effect is what gives the strip its glowing appearance.


What is the difference between coil and strip?

Coil refers to a continuous length of material wound in a spiral shape, like a spring. Strip is a flat and thin piece of material with a consistent width and thickness. Essentially, coil is a rolled or wound form of material, while strip is a flat sheet cut to a specific width.


What is the weight of 50X6mm gi strip?

The weight of a 50X6mm GI strip will depend on the density of the galvanized iron material. You can calculate the weight by multiplying the volume of the strip (length x width x thickness) by the density of the material.


How much does a bimetallic strip cost?

The cost of a bimetallic strip can vary depending on the size, material, and manufacturer. On average, a bimetallic strip can range from a few dollars to tens of dollars.

Related Questions

Where is the security strip in a US 20 dollar bill?

On Series 2004 and later bills, the security strip is located on the left side of the bill about halfway between the edge and the Federal Reserve seal. It glows green under UV light.


What does the security strip say on a US 100 dollar bill?

The thread displays the words "USA 100" repeated many times. It glows pink under UV light.


The electric light incredible as it may appear is produced from a tiny strip of paper that breath would blow away Through this tiny strip of a paper is passed an electric current and the result?

The electric light is produced by passing an electric current through a tiny strip of paper coated with a light-emitting material. When the current flows through the strip, it excites the material, causing it to emit light. This process of converting electrical energy into light is how electric lights work.


Do old US 100 dollar bills have a magnetic strip?

/* Only those printed after 1991. Those printed before 1991 do not have this anti-counterfeiting measure. */Correction:There is no magnetic strip in US bills. There is however what's called a "security strip", a plastic ribbon that glows under UV light. They're used in all denominations from $5 to $100 and were introduced with the 1990 series rather than 1991. The location and color of the strip are different for each denomination.


Is the security strip in the same place on all one hundred dollar bills?

It's in the same place, to the left of Franklin's portrait, on all $100 bills issued since 1990. Earlier bills don't have any type of security strip. In bills dated 1990-2006, the strip glows red under UV light. In 2009 and later bills, the color is pink.


How can I effectively cover a strip light to reduce glare and create a more diffused lighting effect?

You can effectively cover a strip light by using a diffuser material such as frosted acrylic or a light-diffusing film. This will help reduce glare and create a softer, more evenly distributed lighting effect.


Why does incandescent light not glow on material?

Incandescent light bulbs do not emit much Ultraviolet light. Strip lights and compact fluorescent low energy light bulbs do. The whiteners added to white fabrics react to UV light and glow due to fluorescence.


Does the strength of a polymer strip depend on the width of the strip?

Not necessarily. The strengh of a polymer strip can depend on other factors, such as the material is made from.


How does reflective strips glow?

Reflective strips contain tiny glass beads that are coated with a reflective material. When light hits these beads, it is reflected back towards the source, making the strip appear bright and visible in low-light conditions. This reflection effect is what gives the strip its glowing appearance.


The process that continually adds new material to ocean floor is?

sedimentation


What is the difference between coil and strip?

Coil refers to a continuous length of material wound in a spiral shape, like a spring. Strip is a flat and thin piece of material with a consistent width and thickness. Essentially, coil is a rolled or wound form of material, while strip is a flat sheet cut to a specific width.


What is the narrowest strip of Mexico called?

The narrowest strip of Mexico is called Baja California.