answersLogoWhite

0

4.5 kg/m

User Avatar

Wiki User

12y ago

What else can I help you with?

Continue Learning about Physics

How weight of 1meter ms angle 25x25x5?

The weight of a 1 meter MS angle with dimensions 25x25x5 will depend on the density of the material. Assuming a density of 7850 kg/m^3 for mild steel, the weight can be calculated using the formula: weight = volume * density. Calculate the volume of the MS angle first (25x5x2 representing the length, thickness, and two sides) and then multiply by the density to get the weight in kg.


What is unit weight of 60 NB pipe?

The unit weight of a 60 NB (nominal bore) pipe depends on the material it is made from. For example, for a steel pipe with a nominal bore of 60 mm, the approximate unit weight can be calculated using the formula: Unit Weight = (outer diameter - thickness) x thickness x 0.024661.


What is the unit weight of c channel 125?

The unit weight of a C channel 125 depends on its dimensions and material. To calculate the unit weight, you would need to know the dimensions (width, height, and thickness) of the C channel and the material (e.g., steel, aluminum) it is made of. Once you have this information, you can use a standard formula to calculate the unit weight.


What is unit weight of rectangular hollow section?

The unit weight of a rectangular hollow section depends on its dimensions (length, width, and thickness) and the material it is made of. It is typically measured in pounds per foot or kilograms per meter. The unit weight can be calculated by multiplying the cross-sectional area of the section by the density of the material.


What is 40 dia ms pipe weight?

The weight of a 40mm diameter mild steel (MS) pipe would depend on its length and wall thickness. A general estimate for a 40mm MS pipe with a wall thickness of 3mm would be around 3.27 kilograms per meter.

Related Questions

What is the unit weight of Angle ISMA 40?

The unit weight of Angle ISMA 40 is typically around 9.78 kg/m.


What is the unit weight of channel C200X75X6.2 mm thickness?

7.3005


What is the unit weight of angle iron 25X25X3 mm?

The unit weight of angle iron 25x25x3 mm is approximately 1.12 kg/m.


How weight of 1meter ms angle 25x25x5?

The weight of a 1 meter MS angle with dimensions 25x25x5 will depend on the density of the material. Assuming a density of 7850 kg/m^3 for mild steel, the weight can be calculated using the formula: weight = volume * density. Calculate the volume of the MS angle first (25x5x2 representing the length, thickness, and two sides) and then multiply by the density to get the weight in kg.


What are the unit weight of steel plate 3 MM. thickness?

23.55 Kg.


What is the unit weight of ms chequered plate?

chequered plate 5 mm thickness weight is 45.4 kg


What is the unit weight of steel in ton per meter square?

you need the thickness too


What is unit weight of 60 NB pipe?

The unit weight of a 60 NB (nominal bore) pipe depends on the material it is made from. For example, for a steel pipe with a nominal bore of 60 mm, the approximate unit weight can be calculated using the formula: Unit Weight = (outer diameter - thickness) x thickness x 0.024661.


50mm dia ms hollow pipe unit weight?

unit weight = 10.68 (outer dia. of pipe - thickness of pipe) x thickness of pipe unit will be 'lbs/foot' 1 lbs = 0.45359237 kg and 1 foot = 0.3048 meter or 1 meter = 3.2808 feet


Is the angle of the land measured by mass weight or astronomical unit?

None of them.


What unit is the thickness of paper and card measured in?

Paper thickness is measured in grams per square metre (gsm). This is the weight of one square metre of the paper.Answer 2g/m² (gsm) is not a measure of thickness, it is a measure of weight per unit area. Thickness is measured in micrometres (µm).


What is the unit weight of 75x38MM ms rectangle box pipe section?

The unit weight of a 75x38 mm mild steel rectangular box pipe section can be calculated using the formula: Unit Weight = (Weight of steel per cubic meter) × (Volume of the section). The density of mild steel is approximately 7850 kg/m³. For a 75x38 mm section, you'd first calculate the volume based on the dimensions and wall thickness, then multiply by the density to find the unit weight. For precise calculations, the wall thickness is needed.