answersLogoWhite

0

A spherometer is an instrument for the precise measurement of the radius of a sphere. Originally, these instruments were primarily used by opticians to measure the curvature of the surface of a lens. [1]

The usual form consists of a fine screw moving in a nut carried on the centre of a small three-legged table or frame; the feet forming the vertices of an equilateral triangle. The lower end of the screw and those of the table legs are finely tapered and terminate in hemispheres, so that each rests on a point. If the screw has two turns of the thread to the millimetre the head is usually divided into 500 equal parts, so that differences of 0.001 millimetre may be measured without using a vernier. A lens, however, may be fitted, in order to magnify the scale divisions. A vertical scale fastened to the table indicates the number of whole turns of the screw and serves as an index for reading the divisions on the head.

A contact-lever, delicate level or electric contact arrangement may be attached to the spherometer in order to indicate the moment of touching more precisely than is possible by the sense of touch. To measure the radius of a sphere-e.g. the curvature of a lens-the spherometer is levelled and read, then placed on the sphere, adjusted until the four points exert equal pressure, and read again. The difference gives the thickness of that portion of the sphere cut off by a plane passing through the three feet.

User Avatar

Wiki User

∙ 16y ago
User Avatar

What else can I help you with?

Related Questions

Why spherometer is called spherometer?

The reason a spherometer is called a spherometer is because it measures the radius of a sphere.


Why spherometer is so called?

The reason a spherometer is called a spherometer is because it measures the radius of a sphere.


What is the unit of measurement in spherometer?

A spherometer is an instrument for the precise measurement of the radius of a sphere. The spherometer directly measures a sagittal. Since the spherometer is essentially a type of micrometer, it measures very small things like millimeters.


Who invented spherometer?

The spherometer was invented by William Gascoigne in the 17th century. It is a precision instrument used to measure the curvature of spherical surfaces.


Why spherometer has 3 legs?

because to determine the radius of curvatureof a given spherica surface by spherometer


How do you use spherometer?

To use a spherometer, place it gently on the spherical surface to be measured and adjust the central screw until the two outer legs make contact with the surface. The reading on the scale will give you the curvature or depth of the spherical surface at the point of contact.


What is pitch of spherometer?

The distance moved my the screw in one complete rotation in the circular scale is called the pith of spherometer.


How are the pitch and least count of spherometer related?

In general in any screw type instrument such as spherometer or screw gauge or micrometer the least count = pitch / no of head scale divisions Spherometer has an advantage of finding the depth in case of curved surfaces.


What is the minimum thickness sagiita that can be measured by means of spherometer?

3/16" thick is the minimum thickness Sagiita that can be measured by means of spherometer.


Why is zero error not considered in spherometer?

No, you have not any knowledge about spherometer. In spherometer also, similar to other measuring instruments zero error should be considered every time; in order to achieve accurate value.


How can you determine the least count of spherometer?

To determine the least count of a spherometer, you measure the total number of divisions on the circular scale and divide it by the total travel range of the micrometer screw. The least count is the smallest incremental distance that can be measured accurately by the spherometer.


What is least count of spherometer?

The least count of a spherometer is typically equal to the smallest increment that can be measured by the device, which is often around 0.01 mm.