The viscosity of No. 2 diesel fuel at -20°F is typically around 4.0-6.0 cSt (centistokes). However, it's important to note that the exact viscosity can vary depending on the specific blend and composition of the diesel fuel.
If Water = 1 - then Fuel Oil (Diesel) = 0.867 @60/60 Deg F
The kinematic viscosity of water at 20°C is approximately 1.0036 centistokes. This value can vary slightly depending on the exact temperature and pressure conditions.
The conversion factor for PETROL is .711 so 1 ltr weighs 0.711kgPetrol weight 1Litre = 0.711kg (at 60 deg F)NOTE:The density varies between refineries,between lots and with Temperature.
-25 degrees Celsius is equal to -13 degrees Fahrenheit.
21.8 deg C = 71.24 deg F. To convert deg. C to F, multiply deg C by 1.8 and then add 32 to the answer. To convert deg. F to C, subtract 32 from the temp in F and then divide by 1.8.
The viscosity of diesel fuel at 68°F is typically around 2.0 - 3.5 centistokes (cSt). To convert centistokes to centipoise (cps), you can use the equation cP = cSt x density (in g/cm^3) x 1000. The specific density of the diesel fuel will be needed to provide an exact value in cps.
convert 64 cSt in to milipascals
0.84 @20 deg C, but can vary with temperature.
NO!!! It's not the same kind of engine. A diesel engine has glow plugs, a gasoline engine has spark plugs. A diesel engine ignite the fuel by compression, the gasoline engine ignite it with spark plugs.Some people add a SMALL amount of gasoline to their diesel fuel in the winter when the temperature falls below -20 deg celsius (5 deg below zero F), to prevent the diesel from turning waxy.
The density of No. 2 diesel fuel at 110°F (approximately 43°C) typically ranges from about 0.820 to 0.870 grams per cubic centimeter (g/cm³). However, the exact density can vary depending on the specific formulation and additives in the diesel fuel. It's always best to refer to the specifications provided by the fuel supplier for precise values.
between 126 - 204 deg F.
If Water = 1 - then Fuel Oil (Diesel) = 0.867 @60/60 Deg F
4 stages: tighten to 60 nm, back to 20nm, and then 160 deg followed by a further 160 deg.
230 deg. F.
The kinematic viscosity of water at 20°C is approximately 1.0036 centistokes. This value can vary slightly depending on the exact temperature and pressure conditions.
True vapor pressure of distillate fuel oil No. 2 (psi) = 0.0074 + ( 0.00029 ´ ( Average Surface Temperature (deg F) ‑ 60 ) Per EPA publication AP-42
The change volume of the oil due to differnce in temp. For example, if one litre of oil is heated from 45 deg C to 55 deg C, the quantity of oil at 55 deg C, 1007 Milli litre, then the co seeficeint of thermal expansion of this oil is 0.0007cc/cc/deg C