answersLogoWhite

0

Average density of seawater is 1.025, so pressure gradient is approximately 0.444 psi/ft as sea level. At bottom, the pressure is approximately 2235 psia or slightly higher, perhaps 2300 psia.

User Avatar

Wiki User

15y ago

What else can I help you with?

Continue Learning about Physics

Water preesur at 5000 feet deep?

At 5000 feet deep, the water pressure would be approximately 2200 pounds per square inch (psi). This pressure increases by about 14.7 psi for every 33 feet of depth due to the weight of the overlying water column. This high pressure makes it challenging for humans to dive to such depths without specialized equipment.


What is the Water pressure at 5000 feet depth?

The water pressure at 5000 feet depth is approximately 2200 pounds per square inch (psi). This pressure increases by 0.44 psi for every foot of depth.


What is the pressure at a depth of 200 feet?

The pressure at a depth of 200 feet underwater is approximately 86.5 pounds per square inch (psi). This is because pressure increases by 0.433 psi for every foot of depth in water. So, at 200 feet deep, the pressure is 200 ft * 0.433 psi/ft = 86.5 psi.


What is the water pressure at 60ft deep?

The water pressure at 60 feet deep is approximately 26 pounds per square inch (psi). This pressure increases by about 0.43 psi for every additional foot in depth.


What is the water pressure at 5000 feet deep sea water?

The pressure at that depth is 2,167.6 pounds per square inch.I assume you mean a depth of 5000 feet in the ocean, say about the depth of leaky oil wells? If that's the case, when you see the oil coming out as fast as water out of a garden hose, it is pushing against that one ton per square inch pressure at the same time. If that leak was on the surface of the ocean instead of so far down, it probably would be squirting out at supersonic speed.

Related Questions

Water preesur at 5000 feet deep?

At 5000 feet deep, the water pressure would be approximately 2200 pounds per square inch (psi). This pressure increases by about 14.7 psi for every 33 feet of depth due to the weight of the overlying water column. This high pressure makes it challenging for humans to dive to such depths without specialized equipment.


What is the Water pressure at 5000 feet depth?

The water pressure at 5000 feet depth is approximately 2200 pounds per square inch (psi). This pressure increases by 0.44 psi for every foot of depth.


What is the water pressure at 5000 feet below sea level?

'Hydrostatic Pressure' is the Term used for 'the force exerted by a body of fluid at rest. The pressure increases with increase in depth.There are two ways to Calculate water (clean water) pressure at any depth (both yields almost same results):1. The Hydrostatic pressure of water is 0.433 Psi/ft (Pounds per square inch Per feet). So at 5000 feet, the pressure is: 0.433 Psi/ft. * 5000 ft = 2165 Psianother way to go about it is:2. Water pressure increases at 14.7 psi every 34 feet depth. Thus Pressure at 5000 ft will be: (5000 ft / 34 ft) * 14.7 psi = 2162 Psi.


How deep is well in gulf that's leaking?

about 5000 feet


Why is it different at 5000 feet to boil water?

The atmospheric pressure is lower. When you are boiling the water, the water's vapour saturation pressure is able to match the atmospheric pressure faster therefore it boils faster and at a lower temperature.


What is the water pressure at 406 meters deep in psi?

406 meters / 1,332.02 feet of water depth has a pressure of about 39.3 atmospheres or 577.6 psi.


How long is Sakonnet River?

the sakonnet river is 200 feet deep and 5000 feet wide


How deep is the Hellenic Trench?

The Hellenic trench is about 5000 meters or 16404 feet at the Matapan Deep system.


What is the pressure at a depth of 200 feet?

The pressure at a depth of 200 feet underwater is approximately 86.5 pounds per square inch (psi). This is because pressure increases by 0.433 psi for every foot of depth in water. So, at 200 feet deep, the pressure is 200 ft * 0.433 psi/ft = 86.5 psi.


What is the water pressure at 60ft deep?

The water pressure at 60 feet deep is approximately 26 pounds per square inch (psi). This pressure increases by about 0.43 psi for every additional foot in depth.


How many gallons of water would it take to cover 5000 square feet 1 inch deep?

5000 x 1/12 = 416.67 cubic feet At 7.48 gallons per cubic foot, that is 7.48 x 416.67 = 3117 gallons


How much pressure is in 328 feet of water?

If it is fresh water, and the surface is at sea level, then the pressure at the surface is 14.69 psi. As you submerge, then the pressure from the weight of the water above you is added to the air pressure above the water. For each foot that you descend, the water pressure will increase by 0.4331 psi, so at 328 feet deep, the water pressure is 142.0568 psi. Add the 14.69 psi air pressure to get 156.7468 psi.