answersLogoWhite

0

About 2,360 pounds per square inch (psi) or 163 bar.

User Avatar

Wiki User

10y ago

What else can I help you with?

Continue Learning about Physics

How much does 1 cubic mile of water weigh?

5280 ft x 5280 ft x 5280 ft x 62.4 lbs per square ft = 9,185,152,204,800 lbs


How deep is 100 ATM?

One atmosphere of pressure is equal to the pressure at sea level. Therefore, 100 atmospheres would be roughly equivalent to the pressure experienced at a depth of about 3,000 feet (914 meters) underwater.


Does pressure increase or decrease in deep water?

I'm not quite sure, but I would say that pressure does increase as you near the center of the Earth. Some argue that when you reach the center, there would be no pressure because of the equal amount of weight on each side. My question is...is the weight equal on every side. If not, then there would be pressure inside the core of the Earth.


How can one determine the water vapor pressure in a given environment?

To determine the water vapor pressure in a given environment, one can use a hygrometer or a psychrometer to measure the relative humidity of the air. The water vapor pressure can then be calculated using the saturation vapor pressure at the current temperature.


What are the methods for conducting water pressure calculations based on the height of a water source?

One method for calculating water pressure based on the height of a water source is using the formula P gh, where P is the pressure, is the density of water, g is the acceleration due to gravity, and h is the height of the water source. Another method is to use the concept of head pressure, which is the pressure exerted by a column of water due to its height.

Related Questions

What releases high pressure hot water from deep reservoir?

i believe one way vents.


How many gallons of water are in a cubic mile if it is one foot deep?

(1 mile)3 x (5,280 feet per mile)3 x (12 inches per foot)3 / (231 cubic inches per gallon) =1,101,117,147,428.57 gallonsor 1.10112 trillion gallons (rounded)


Why air pressure is lower than water pressure?

Water Pressure is higher because of it's molecular weight as compared to air.


Which lake is the deepest lake in the world?

lake baikal its in Russia and is almost one mile deep and has more fresh water than all American lakes combined


Which dam must be stronger one that holds back 100000 cubic meters of water 10m deep or one that holds back 1000 cubic meters of water 20m deep?

At a greater depth, there is a greater pressure, period. The amount of water in the dam is irrelevant.


How many acres of water is in one square mile?

One square mile is equal to 640 acres of water.


How much does 1 cubic mile of water weigh?

5280 ft x 5280 ft x 5280 ft x 62.4 lbs per square ft = 9,185,152,204,800 lbs


What variables affect the temperature a mile apart?

High and low pressure systems. 1 mile south could be a low pressure system which would have a different temperature than a mile north with a high pressure system. Thats just one variable though.


What is the water pressure one mile deep in the ocean?

The Pressure (in the air) at the top surface of the ocean, at "Sea Level", is approx. 14.7 pounds of force on every square inch of area (called "psi"). This 14.7psi is also called 1 standard atmosphere (what our bodies are normally used to experiencing). We do not normally "feel" this pressure since the inside of our body is also experiencing this same 14.7 psi. Now as you go deeper and deeper under water the additional pressure is equal to the weight of the water above you. For every 407 inches of water (34 feet) you move down in the water the pressure goes up an additional 14.7 psi or 1 additional atmosphere. Now 1 mile = 5280 Feet = 63,360 Inches and 1 cubic inch of water (1 inch wide X 1 inch long X 1 inch deep) weighs 0.036 pounds (symbol is "lbs") so a 1 inch wide X 1 inch long X 1 mile deep "slice of water weighs 2,280 pounds (lbs) or over a ton. SHORT ANSWER the pressure 1 mile down is over 2,280 pounds of force on every square inch of area (2,280 psi) or 155 atmospheres(155 times normal sea level pressure). This is like having a small car (1 ton) pressing down on every 1 inch wide by 1 inch long bit of surface(in the case of the BP spill, this is why the robots are used in place of humans, because the pressure is way to high for the human body).


How many gal water in a cubic mile?

One cubic mile contains 1.10111715 × 1012 US gallons of water.


How much water do you have?

Scientists estimate that we have 326 million cubic miles of water. That means if I had a cube one mile by one mile by one mile and filled it with water that would be one cubic mile. So,if I had 326 million of those cubes (all filled with water) then that would be about the same amount of water on the Earth. About 72% of Earth is covered in water but 97% of that water is useless because it is salty.3% of water is left but 70% of 3% is frozen so we only have less than 1% of the Earth's water.


Is there air pressure in water?

Water is effectively an incompressible substance, so pressure does not affect its' volume. However, its boiling and freezing points are directly related to the external pressure. Water boils when its vapor pressure is equal to the external pressure (or the atmospheric pressure if it is contained in some uncovered pot). Greater external pressure requires higher temperature for water so as to have that value of vapor pressure for it to boil. This is how pressure affects water.